chocky335 · Oct 19, 2026 · Oct 19, 2026 · Oct 19, 2026 · Oct 19, 2026
diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -5,6 +5,75 @@ the entry for the matching version.
 
 ## Unreleased
 
+## 1.0.0 - 2026-10-20
+
+First stable v1 release. Install it with
+`npx expo install react-native-swipeable-actions@^1`. Rebuild the iOS and Android
+apps after you upgrade. Read the [v1 migration guide](docs/migration-v1.md).
+The package code is the same as in 1.0.0-rc.0. The lists below are the changes
+since 0.1.12.
+
+### BREAKING CHANGES
+
+- The package requires the New Architecture (Fabric) on iOS and Android. The
+  legacy architecture (Paper) is not supported. The iOS view does not compile on it.
+- The minimum peer versions are now Expo SDK 54 (`expo >=54.0.0`), React Native
+  0.81 (`react-native >=0.81.0`) and React 19.1 (`react >=19.1.0`).
+- Removed `actions`, `actionsWidth` and `actionsPosition`. Pass explicit pairs:
+  `rightActions` + `rightActionsWidth` and/or `leftActions` + `leftActionsWidth`
+  ([#15](https://github.com/chocky335/react-native-swipeable-actions/issues/15)).
+- Removed `SWIPE_DEFAULTS.ACTIONS_POSITION`. There is no default side.
+- Removed `actionsWidth` and `actionsPosition` from the raw `SwipeableView` props.
+- `SwipeableProps` is now a union type of valid side configurations, not an
+  interface. Use `SwipeableProps & { ... }` for wrapper props.
+- Every row uses one native engine. Rows migrated from the single-sided API take
+  its behavior:
+  - A drag toward a disabled side stays closed and does not start a swipe. The
+    old wrong-direction rubber band is gone.
+  - `onSwipeStateChange` follows the active side. Do not depend on the old
+    callback cadence.
+  - `close(false)` and `cancel()` also clear the cached open state for the key.
+  - Cache restoration and width updates are not swipes. Do not use the swipe
+    callbacks to detect them.
+- `open()` with no side opens the right side if it is enabled, else the left side.
+
+### Added
+
+- Independent left and right actions on one row, each with its own width.
+- `open(side)` and `Swipeable.open(key, side)`.
+- `onLeftSwipeEnd` and `onRightSwipeEnd`. They run after `onSwipeEnd`.
+- Opt-in `appearance="ios26"` iOS action motion, and the `hapticFeedback`
+  prop for the iOS threshold haptic. Reduce Motion removes the motion scaling
+  ([#19](https://github.com/chocky335/react-native-swipeable-actions/issues/19)).
+- Type exports `SwipeSide`, `SwipeAppearance`, `SwipeableCommonProps`,
+  `SwipeStartEvent`, and the aliases `TwoSidedSwipeableProps` and
+  `SwipeableComponentProps`.
+
+### Fixed
+
+- Action alignment on the physical edge in RTL layouts.
+- A recycled or rebound row no longer receives commands, callbacks or open state
+  from its previous key.
+- A drag that crosses the closed position no longer opens the opposite side.
+- On Android, content replaced during a drag no longer keeps the drag offset.
+- `Swipeable.closeAll()` now also closes rows that are not mounted (scrolled off
+  or on a covered screen), like `Swipeable.close(key)`.
+- `expo-modules-core` is no longer a peer dependency. A fresh `npm install`
+  could pull a newer expo-modules-core than the app's Expo SDK uses. The app now
+  gets the version its `expo` package brings.
+- The shipped Jest mock (`jestSetup.js`) no longer calls `onSwipeStart` when a row
+  mounts. Tests that relied on that call must fire the native event themselves,
+  as the README shows.
+- On Android, a swipe with no touch events for 5 seconds is now cancelled
+  without an `onSwipeEnd`, and the rest of that touch is ignored.
+- A cancelled swipe now reports the position where the row settles to
+  `onProgress` and `onSwipeStateChange`, so a progress UI does not stay mid-drag.
+- An `autoClose` row that a cancelled drag returns to open now waits
+  `autoCloseTimeout` again and closes. Before, it stayed open.
+- On iOS, a pan that has not passed `dragOffsetFromEdge` no longer stops a
+  pending auto-close or a settling animation. That work and a props change also
+  no longer swallow the pan, so the pan can still start a swipe, like on Android.
+
 ## 1.0.0-rc.0 - 2026-10-17
 
 First release candidate for 1.0.0. Install it with

diff --git a/docs/migration-v1.md b/docs/migration-v1.md
@@ -10,8 +10,8 @@ Do not mix v1 JavaScript with an older native binary.
   architecture (Paper) is not supported. If your app still uses it, stay on 0.x.
 - v1 requires Expo SDK 54 or newer, React Native 0.81 or newer and React 19.1 or
   newer. Upgrade the app first, then install v1.
-- Install it with `npx expo install react-native-swipeable-actions@next` while
-  1.0 is a release candidate, then rebuild the iOS and Android apps.
+- Install it with `npx expo install react-native-swipeable-actions@^1`, then rebuild
+  the iOS and Android apps.
 
 ## At a glance
 

diff --git a/docs/support.md b/docs/support.md
@@ -44,7 +44,7 @@ The package declares these ranges. They are minimums, not a tested matrix.
 
 ## Tested for 1.0
 
-Every configuration below ran the release candidate. The E2E suite has 62 cases
+Each 1.0 release must pass a full CI run on every configuration below. The E2E suite has 62 cases
 (25 single-sided, 19 two-sided, 14 RTL, 3 swipe to go back, 1 performance) plus the
 Maestro flows.
 

diff --git a/e2e/README.md b/e2e/README.md
@@ -103,7 +103,7 @@ The final `e2e-ios` gate requires all five jobs to succeed, all 62 registered ca
 
 Run `cd e2e && npm run test:harness` for the offline shard-evidence regressions alongside the existing harness tests. Offline success does not establish simulator acceptance. Job isolation prevents one serial run from leaving later suites unstarted; it does not change or excuse individual test timeouts.
 
-## Upcoming 1.0.0 API migration
+## 1.0.0 API migration
 
 The demo now uses explicit physical-side content/width pairs for every row. The original
 25 cases in `swipeable.spec.ts` remain, alongside 19 two-sided, 14 RTL, 3 swipe-to-go-back and
@@ -118,4 +118,4 @@ only an existing test ID, not an accepted prop or fallback path. Press-counter t
 Migrated single-side rows intentionally adopt the canonical engine's disabled-edge,
 state-callback and instant-close/cache behavior. See
 [the intentional behavior changes](../docs/migration-v1.md#intentional-behavior-changes).
-Historical runs do not establish acceptance of this upcoming release.
+Historical runs do not establish acceptance of a later release.
diff --git a/package-lock.json b/package-lock.json
diff --git a/package.json b/package.json
@@ -1,6 +1,6 @@
 {
   "name": "react-native-swipeable-actions",
-  "version": "1.0.0-rc.0",
+  "version": "1.0.0",
   "description": "High-performance native swipeable row component for React Native using Expo Modules",
   "main": "src/index.ts",
   "types": "build/index.d.ts",