Skip to content

Sync device catalog from upstream sources #2815

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
bdraco merged 1 commit into from
Sep 21, 2026
Merged

Sync device catalog from upstream sources #2815

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
The table of contents is too big for display.
Diff view
Diff view
  •  
  •  
  •  
1 change: 1 addition & 0 deletions esphome_device_builder/definitions/board_bodies/kincony_b2.json
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1 @@
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B2/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"featured_bundles":[{"component_ids":["uart_1","bus_a","ads1115_hub","onboard_ethernet","binary_sensor_gpio_1","binary_sensor_gpio_2","binary_sensor_gpio_3","binary_sensor_gpio_4","binary_sensor_gpio_5","binary_sensor_gpio_6","sensor_ads1115_1","sensor_ads1115_2","sensor_ads1115_3","sensor_ads1115_4","switch_uart_1","switch_gpio_1","switch_gpio_2"],"id":"all_recommended","name":"KinCony-B2 (ESP32-S3 2CH Relay board) (full setup)"}],"featured_components":[{"component_id":"uart","fields":{"baud_rate":{"value":9600},"debug":{"locked":true,"value":{"after":{"timeout":"10ms"},"direction":"BOTH","dummy_receiver":true}},"id":{"locked":true,"value":"uart_1"},"rx_pin":{"locked":true,"value":39},"tx_pin":{"locked":true,"value":38}},"id":"uart_1","locked_pins":{"rx_pin":39,"tx_pin":38}},{"component_id":"i2c","fields":{"frequency":{"value":"400kHz"},"id":{"locked":true,"value":"bus_a"},"scan":{"value":true},"scl":{"locked":true,"value":18},"sda":{"locked":true,"value":8}},"id":"bus_a","locked_pins":{"scl":18,"sda":8}},{"component_id":"ads1115","fields":{"address":{"value":72}},"id":"ads1115_hub","requires":["bus_a"]},{"component_id":"ethernet","fields":{"clk_pin":{"locked":true,"value":"GPIO1"},"cs_pin":{"locked":true,"value":"GPIO42"},"interrupt_pin":{"locked":true,"value":"GPIO43"},"miso_pin":{"locked":true,"value":"GPIO41"},"mosi_pin":{"locked":true,"value":"GPIO2"},"reset_pin":{"locked":true,"value":"GPIO44"},"type":{"locked":true,"value":"W5500"}},"id":"onboard_ethernet","locked_pins":{"clk_pin":1,"cs_pin":42,"interrupt_pin":43,"miso_pin":41,"mosi_pin":2,"reset_pin":44},"multi_conf":false,"name":"Onboard Ethernet"},{"component_id":"binary_sensor.gpio","fields":{"id":{"value":"binary_sensor_gpio_1"},"name":{"value":"b2-input01"},"pin":{"locked":true,"value":{"inverted":true,"number":6}}},"id":"binary_sensor_gpio_1","locked_pins":{"pin":6}},{"component_id":"binary_sensor.gpio","fields":{"id":{"value":"binary_sensor_gpio_2"},"name":{"value":"b2-input02"},"pin":{"locked":true,"value":{"inverted":true,"number":7}}},"id":"binary_sensor_gpio_2","locked_pins":{"pin":7}},{"component_id":"binary_sensor.gpio","fields":{"id":{"value":"binary_sensor_gpio_3"},"name":{"value":"b2-W1-io47"},"pin":{"locked":true,"value":{"inverted":true,"number":47}}},"id":"binary_sensor_gpio_3","locked_pins":{"pin":47}},{"component_id":"binary_sensor.gpio","fields":{"id":{"value":"binary_sensor_gpio_4"},"name":{"value":"b2-W1-io48"},"pin":{"locked":true,"value":{"inverted":true,"number":48}}},"id":"binary_sensor_gpio_4","locked_pins":{"pin":48}},{"component_id":"binary_sensor.gpio","fields":{"id":{"value":"binary_sensor_gpio_5"},"name":{"value":"b2-W1-io17"},"pin":{"locked":true,"value":{"inverted":true,"number":17}}},"id":"binary_sensor_gpio_5","locked_pins":{"pin":17}},{"component_id":"binary_sensor.gpio","fields":{"id":{"value":"binary_sensor_gpio_6"},"name":{"value":"b2-W1-io40"},"pin":{"locked":true,"value":{"inverted":true,"number":40}}},"id":"binary_sensor_gpio_6","locked_pins":{"pin":40}},{"component_id":"sensor.ads1115","fields":{"gain":{"value":6.144},"id":{"value":"sensor_ads1115_1"},"multiplexer":{"value":"A0_GND"},"name":{"value":"ADS1115 Channel A0-GND"},"resolution":{"value":"16_BITS"},"update_interval":{"value":"5s"}},"id":"sensor_ads1115_1","requires":["bus_a","ads1115_hub"]},{"component_id":"sensor.ads1115","fields":{"gain":{"value":6.144},"id":{"value":"sensor_ads1115_2"},"multiplexer":{"value":"A1_GND"},"name":{"value":"ADS1115 Channel A1-GND"},"update_interval":{"value":"5s"}},"id":"sensor_ads1115_2","requires":["bus_a","ads1115_hub"]},{"component_id":"sensor.ads1115","fields":{"gain":{"value":6.144},"id":{"value":"sensor_ads1115_3"},"multiplexer":{"value":"A2_GND"},"name":{"value":"ADS1115 Channel A2-GND"},"update_interval":{"value":"5s"}},"id":"sensor_ads1115_3","requires":["bus_a","ads1115_hub"]},{"component_id":"sensor.ads1115","fields":{"gain":{"value":6.144},"id":{"value":"sensor_ads1115_4"},"multiplexer":{"value":"A3_GND"},"name":{"value":"ADS1115 Channel A3-GND"},"update_interval":{"value":"5s"}},"id":"sensor_ads1115_4","requires":["bus_a","ads1115_hub"]},{"component_id":"switch.uart","fields":{"data":{"locked":true,"value":[17,34,51,68,85]},"id":{"value":"switch_uart_1"},"name":{"value":"RS485 Button"},"uart_id":{"locked":true,"value":"uart_1"}},"id":"switch_uart_1","requires":["uart_1"]},{"component_id":"switch.gpio","fields":{"id":{"value":"switch_gpio_1"},"inverted":{"locked":true,"value":false},"name":{"value":"b2-output01"},"pin":{"locked":true,"value":4}},"id":"switch_gpio_1","locked_pins":{"pin":4}},{"component_id":"switch.gpio","fields":{"id":{"value":"switch_gpio_2"},"inverted":{"locked":true,"value":false},"name":{"value":"b2-output02"},"pin":{"locked":true,"value":46}},"id":"switch_gpio_2","locked_pins":{"pin":46}}],"full_config":true,"hardware":{"connectivity":["wifi","bluetooth","ethernet"]},"id":"kincony_b2","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B2/B2-2.jpg"],"manufacturer":"","name":"KinCony-B2 (ESP32-S3 2CH Relay board)","pins":[{"available":false,"gpio":1,"label":"GPIO1","occupied_by":"Ethernet CLK"},{"available":false,"gpio":2,"label":"GPIO2","occupied_by":"Ethernet MOSI"},{"available":false,"gpio":4,"label":"GPIO4","occupied_by":"b2-output01"},{"available":false,"gpio":6,"label":"GPIO6","occupied_by":"b2-input01"},{"available":false,"gpio":7,"label":"GPIO7","occupied_by":"b2-input02"},{"available":false,"gpio":8,"label":"GPIO8","occupied_by":"bus_a"},{"available":false,"gpio":17,"label":"GPIO17","occupied_by":"b2-W1-io17"},{"available":false,"gpio":18,"label":"GPIO18","occupied_by":"bus_a"},{"available":false,"gpio":38,"label":"GPIO38","occupied_by":"uart_1"},{"available":false,"gpio":39,"label":"GPIO39","occupied_by":"uart_1"},{"available":false,"gpio":40,"label":"GPIO40","occupied_by":"b2-W1-io40"},{"available":false,"gpio":41,"label":"GPIO41","occupied_by":"Ethernet MISO"},{"available":false,"gpio":42,"label":"GPIO42","occupied_by":"Ethernet CS"},{"available":false,"gpio":43,"label":"GPIO43","occupied_by":"Ethernet INT"},{"available":false,"gpio":44,"label":"GPIO44","occupied_by":"Ethernet RESET"},{"available":false,"gpio":46,"label":"GPIO46","occupied_by":"b2-output02"},{"available":false,"gpio":47,"label":"GPIO47","occupied_by":"b2-W1-io47"},{"available":false,"gpio":48,"label":"GPIO48","occupied_by":"b2-W1-io48"}],"tags":["relay"]}
1 change: 1 addition & 0 deletions esphome_device_builder/definitions/board_bodies/kincony_co16.json
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1 @@
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-CO16/","esphome":{"board":"esp32-s3-devkitc-1","framework":"esp-idf","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"featured_bundles":[{"component_ids":["onboard_psram","onboard_ethernet"],"id":"all_recommended","name":"KinCony-CO16 (ESP32-S3 16CH Analog Input board) (full setup)"}],"featured_components":[{"component_id":"psram","fields":{"mode":{"value":"octal"},"speed":{"value":"80MHz"}},"id":"onboard_psram","multi_conf":false,"name":"PSRAM"},{"component_id":"ethernet","fields":{"clk_pin":{"locked":true,"value":"GPIO1"},"clock_speed":{"locked":true,"value":"16MHz"},"cs_pin":{"locked":true,"value":"GPIO42"},"interrupt_pin":{"locked":true,"value":"GPIO43"},"miso_pin":{"locked":true,"value":"GPIO41"},"mosi_pin":{"locked":true,"value":"GPIO2"},"reset_pin":{"locked":true,"value":"GPIO44"},"type":{"locked":true,"value":"W5500"}},"id":"onboard_ethernet","locked_pins":{"clk_pin":1,"cs_pin":42,"interrupt_pin":43,"miso_pin":41,"mosi_pin":2,"reset_pin":44},"multi_conf":false,"name":"Onboard Ethernet"}],"full_config":true,"hardware":{"connectivity":["wifi","bluetooth","ethernet"]},"id":"kincony_co16","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-CO16/CO16-2.jpg"],"manufacturer":"","name":"KinCony-CO16 (ESP32-S3 16CH Analog Input board)","pins":[{"available":false,"gpio":1,"label":"GPIO1","occupied_by":"Ethernet CLK"},{"available":false,"gpio":2,"label":"GPIO2","occupied_by":"Ethernet MOSI"},{"available":false,"gpio":41,"label":"GPIO41","occupied_by":"Ethernet MISO"},{"available":false,"gpio":42,"label":"GPIO42","occupied_by":"Ethernet CS"},{"available":false,"gpio":43,"label":"GPIO43","occupied_by":"Ethernet INT"},{"available":false,"gpio":44,"label":"GPIO44","occupied_by":"Ethernet RESET"}],"tags":["relay"]}
2 changes: 2 additions & 0 deletions esphome_device_builder/definitions/boards.index.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -479,13 +479,15 @@
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-ATF/","esphome":{"board":"esp32dev","framework":"arduino","platform":"esp32","variant":"esp32"},"id":"kincony_atf","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-ATF/esp32-sd-card-pins.jpg"],"manufacturer":"","name":"KinCony-ATF (ESP32-S3 SD Card Module)"},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B16/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_b16","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B16/B16_diagram-1.jpg","https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B16/B16_diagram-2.jpg"],"manufacturer":"","name":"KinCony-B16 (ESP32-S3 16CH Relay board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B16M/","esphome":{"board":"esp32-s3-devkitc-1","framework":"esp-idf","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"id":"kincony_b16m","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B16M/ESP32-B16M-2.jpg","https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B16M/B16M-diagram.jpg"],"manufacturer":"","name":"KinCony-B16M (ESP32-S3 16CH MOSFET)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B2/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"id":"kincony_b2","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B2/B2-2.jpg"],"manufacturer":"","name":"KinCony-B2 (ESP32-S3 2CH Relay board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B24/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_b24","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B24/B24-1.jpg"],"manufacturer":"","name":"KinCony-B24 (ESP32-S3 16CH Relay board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B24M/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_b24m","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B24M/B24M-1.jpg"],"manufacturer":"","name":"KinCony-B24M (ESP32-S3 16CH MOSFET)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B32M/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_b32m","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B32M/B32M_1.jpg"],"manufacturer":"","name":"KinCony-B32M (ESP32-S3 32CH MOSFET)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B4/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"id":"kincony_b4","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B4/B4-1.jpg"],"manufacturer":"","name":"KinCony-B4 (ESP32-S3 4CH Relay board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B4M/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"id":"kincony_b4m","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B4M/B4M-1.jpg"],"manufacturer":"","name":"KinCony-B4M (ESP32-S3 4CH Mosfet board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B8/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_b8","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B8/B8-1.jpg"],"manufacturer":"","name":"KinCony-B8 (ESP32-S3 8CH Relay board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-B8M/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_b8m","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B8M/B8M_1.jpg","https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-B8M/B8M-diagram.jpg"],"manufacturer":"","name":"KinCony-B8M (ESP32-S3 8CH MOSFET)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-CO16/","esphome":{"board":"esp32-s3-devkitc-1","framework":"esp-idf","logger_hardware_uart":"USB_SERIAL_JTAG","platform":"esp32","variant":"esp32s3"},"id":"kincony_co16","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-CO16/CO16-2.jpg"],"manufacturer":"","name":"KinCony-CO16 (ESP32-S3 16CH Analog Input board)","tags":["relay"]},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-DM16/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_dm16","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-DM16/DM16-1.jpg"],"manufacturer":"","name":"KinCony-DM16 (ESP32-S3 16CH Dimmer board)"},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-DM32/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_dm32","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-DM32/DM32-1.jpg"],"manufacturer":"","name":"KinCony-DM32 (ESP32-S3 32CH Dimmer board)"},
{"description":"Imported from devices.esphome.io — see linked docs for community notes.","docs_url":"https://devices.esphome.io/devices/KinCony-DM4/","esphome":{"board":"esp32-s3-devkitc-1","framework":"arduino","platform":"esp32","variant":"esp32s3"},"id":"kincony_dm4","images":["https://raw.githubusercontent.com/esphome/devices.esphome.io/main/src/docs/devices/KinCony-DM4/DM4-1.jpg"],"manufacturer":"","name":"KinCony-DM4 (ESP32-S3 4CH Dimmer board)"},
Expand Down
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/4moms_mamaroo_4/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -24,5 +24,5 @@ source:
type: esphome-devices
remote_id: 4moms-mamaroo-4
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/4moms-mamaroo-4/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: 51f128e6c8cad3c6e775433f17e8d156144bcbaec17ab8173430c236778d3676
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/acenx_sop04_us/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -86,5 +86,5 @@ source:
type: esphome-devices
remote_id: Acenx-SOP04-US
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/Acenx-SOP04-US/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: e0338729cd9b45e17a23c4583ed758d92d8c31d18d482f05c67ed88cf12c97fe
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/ads_wsm_1a/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -45,5 +45,5 @@ source:
type: esphome-devices
remote_id: ADS-WSM-1A
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/ADS-WSM-1A/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: c662c97ca9727e9e02678513c0423003511f6d447ca3196ae72433da32a46199
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/agl_2_3_gang_switch/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -88,5 +88,5 @@ source:
type: esphome-devices
remote_id: AGL-2-3-Gang-Switch
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/AGL-2-3-Gang-Switch/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: 8c41c1b92ac49e2541dd04fe626a7a8322ae001b6d6a1aab5d733f567b66dbee
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/ahrise_ahr_083/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -104,5 +104,5 @@ source:
type: esphome-devices
remote_id: AHRise-AHR-083
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/AHRise-AHR-083/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: e70c9474ba5830b33a7987b9d87e44b997b883c4eda38d1f4d0c484c864aeed2
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/alfawise_sj_7/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -35,5 +35,5 @@ source:
type: esphome-devices
remote_id: Alfawise-SJ-7
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/Alfawise-SJ-7/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: 837539f03a867cf41efd58de05a5e4cb27e25c2b1887bb8efd2fe55444cdf3ff
2 changes: 1 addition & 1 deletion ...ce_builder/definitions/boards/antsig_grid_connect_smart_ir_universal_remote/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -27,5 +27,5 @@ source:
type: esphome-devices
remote_id: Antsig-Grid-Connect-Smart-IR-Universal-Remote
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/Antsig-Grid-Connect-Smart-IR-Universal-Remote/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: cd0b04d92ee877babf38b2b12c9115985cf24e299700487a52edd22a56fe0b5a
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/boards/anwio_a19_e26_rgbww_8_5w_light_bulb/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -101,5 +101,5 @@ source:
type: esphome-devices
remote_id: Anwio-A19-E26-RGBWW-8.5W-Light-Bulb
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/Anwio-A19-E26-RGBWW-8.5W-Light-Bulb/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: 21040773679ebc76ea0483d93b69f502fd5c0a8546364ffd1fcf6d61e520e948
2 changes: 1 addition & 1 deletion ...ome_device_builder/definitions/boards/anwio_br30_e26_rgb_cct_13w_light_bulb/manifest.yaml
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -98,5 +98,5 @@ source:
type: esphome-devices
remote_id: Anwio-BR30-E26-RGB-CCT-13W-Light-Bulb
upstream_url: https://github.com/esphome/devices.esphome.io/blob/main/src/docs/devices/Anwio-BR30-E26-RGB-CCT-13W-Light-Bulb/index.md
upstream_revision: 7ed8ca529f3cd6bd6ffad875ecb97266df710789
upstream_revision: 751dffa5cfa5155862306e5209e94f4e0dea7f83
content_hash: 89dbba60bad778bf9127cb4d8ffea107591c5c4385def31c65a1ecea1b0ac804
Loading
Loading