Merge tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2020-11-03

The first two patches are by Oleksij Rempel and they add a generic
can-controller Device Tree yaml binding and convert the text based binding
of the flexcan driver to a yaml based binding.

Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN
core.

A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload
helper.

Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in
hard IRQ context in can_get_echo_skb().

Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames
in the __can_get_echo_skb() helper.

Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in
can_create_echo_skb().

Yegor Yefremov contributes 4 patches to enhance the j1939 documentation.

Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind()
if the netdev is down.

Then there are three patches for the newly added CAN_ISOTP protocol. Geert
Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds
missing RX timeout handling in listen-only mode and Colin Ian King's patch
decreases the generated object code by 926 bytes.

Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the
error path in the probe function.

Navid Emamdoost's patch for the xilinx_can driver fixes the error handling
in case of failing pm_runtime_get_sync().

There are two patches for the peak_usb driver. Dan Carpenter adds range
checking in decode operations and Stephane Grosjean's patch fixes
a timestamp wrapping problem.

Stephane Grosjean's patch for th peak_canfd driver fixes echo management if
loopback is on.

The next three patches all target the mcp251xfd driver. The first one is
by me and it increased the severity of CRC read error messages. The kernel
test robot removes an unneeded semicolon and Tom Rix removes unneeded
break in several switch-cases.

The last 4 patches are by Joakim Zhang and target the flexcan driver,
the first three fix ECC related device specific quirks for the LS1021A,
LX2160A and the VF610 SoC. The last patch disable wakeup completely upon
driver remove.

* tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits)
  can: flexcan: flexcan_remove(): disable wakeup completely
  can: flexcan: add ECC initialization for VF610
  can: flexcan: add ECC initialization for LX2160A
  can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
  can: mcp251xfd: remove unneeded break
  can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
  can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
  can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
  can: peak_usb: add range checking in decode operations
  can: xilinx_can: handle failure cases of pm_runtime_get_sync
  can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
  can: isotp: padlen(): make const array static, makes object smaller
  can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
  can: isotp: Explain PDU in CAN_ISOTP help text
  can: j1939: j1939_sk_bind(): return failure if netdev is down
  can: j1939: use backquotes for code samples
  can: j1939: swap addr and pgn in the send example
  can: j1939: fix syntax and spelling
  can: j1939: rename jacd tool
  ...
====================

Link: https://lore.kernel.org/r/<20201103220636.972106-1-mkl@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Author: kuba-moo

Documentation/devicetree/bindings/net/can/can-controller.yaml

@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^can(@.*)?$"
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml

@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+  - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8qm-flexcan
+          - fsl,imx8mp-flexcan
+          - fsl,imx6q-flexcan
+          - fsl,imx53-flexcan
+          - fsl,imx35-flexcan
+          - fsl,imx28-flexcan
+          - fsl,imx25-flexcan
+          - fsl,p1010-flexcan
+          - fsl,vf610-flexcan
+          - fsl,ls1021ar2-flexcan
+          - fsl,lx2160ar1-flexcan
+      - items:
+          - enum:
+              - fsl,imx7d-flexcan
+              - fsl,imx6ul-flexcan
+              - fsl,imx6sx-flexcan
+          - const: fsl,imx6q-flexcan
+      - items:
+          - enum:
+              - fsl,ls1028ar1-flexcan
+          - const: fsl,lx2160ar1-flexcan
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  clock-frequency:
+    description: |
+      The oscillator frequency driving the flexcan device, filled in by the
+      boot loader. This property should only be used the used operating system
+      doesn't support the clocks and clock-names property.
+
+  xceiver-supply:
+    description: Regulator that powers the CAN transceiver.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      This means the registers of FlexCAN controller are big endian. This is
+      optional property.i.e. if this property is not present in device tree
+      node then controller is assumed to be little endian. If this property is
+      present then controller is assumed to be big endian.
+
+  fsl,stop-mode:
+    description: |
+      Register bits of stop mode control.
+
+      The format should be as follows:
+      <gpr req_gpr req_bit>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of CAN stop request.
+      req_bit is the bit offset of CAN stop request.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: The 'gpr' is the phandle to general purpose register node.
+      - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+        maximum: 0xff
+      - description: The 'req_bit' is the bit offset of CAN stop request.
+        maximum: 0x1f
+
+  fsl,clk-source:
+    description: |
+      Select the clock source to the CAN Protocol Engine (PE). It's SoC
+      implementation dependent. Refer to RM for detailed definition. If this
+      property is not set in device tree node then driver selects clock source 1
+      by default.
+      0: clock source 0 (oscillator clock)
+      1: clock source 1 (peripheral clock)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    minimum: 0
+    maximum: 1
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable CAN remote wakeup.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    can@1c000 {
+        compatible = "fsl,p1010-flexcan";
+        reg = <0x1c000 0x1000>;
+        interrupts = <48 0x2>;
+        interrupt-parent = <&mpic>;
+        clock-frequency = <200000000>;
+        fsl,clk-source = <0>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    can@2090000 {
+        compatible = "fsl,imx6q-flexcan";
+        reg = <0x02090000 0x4000>;
+        interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks 1>, <&clks 2>;
+        clock-names = "ipg", "per";
+        fsl,stop-mode = <&gpr 0x34 28>;
+    };