Merge tag 'arm-soc/for-5.10/soc' of https://github.com/Broadcom/stblinux into arm/soc

This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:

- Florian adds debug UART entries for the 72164 and 72165 SoCs and
  updates ARCH_BRCMSTB to select CONFIG_BCM7038_L1_IRQ which is an
  interrupt controller used with the 7211 chip family

* tag 'arm-soc/for-5.10/soc' of https://github.com/Broadcom/stblinux:
  ARM: brcmstb: Add debug UART entry for 72615
  ARM: bcm: Enable BCM7038_L1_IRQ for ARCH_BRCMSTB
  ARM: brcmstb: Add debug UART entry for 72614

Link: https://lore.kernel.org/r/20200912032153.1216354-5-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Author: olofj

arch/arm/include/debug/brcmstb.S

@@ -32,6 +32,8 @@
 #define UARTA_7271		UARTA_7268
 #define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
 #define UARTA_7216		UARTA_7278
+#define UARTA_72164		UARTA_7278
+#define UARTA_72165		UARTA_7278
 #define UARTA_7364		REG_PHYS_ADDR(0x40b000)
 #define UARTA_7366		UARTA_7364
 #define UARTA_74371		REG_PHYS_ADDR(0x406b00)
@@ -84,17 +86,19 @@ ARM_BE8(	rev	\rv, \rv )
 		/* Chip specific detection starts here */
 20:		checkuart(\rp, \rv, 0x33900000, 3390)
 21:		checkuart(\rp, \rv, 0x72160000, 7216)
-22:		checkuart(\rp, \rv, 0x72500000, 7250)
-23:		checkuart(\rp, \rv, 0x72550000, 7255)
-24:		checkuart(\rp, \rv, 0x72600000, 7260)
-25:		checkuart(\rp, \rv, 0x72680000, 7268)
-26:		checkuart(\rp, \rv, 0x72710000, 7271)
-27:		checkuart(\rp, \rv, 0x72780000, 7278)
-28:		checkuart(\rp, \rv, 0x73640000, 7364)
-29:		checkuart(\rp, \rv, 0x73660000, 7366)
-30:		checkuart(\rp, \rv, 0x07437100, 74371)
-31:		checkuart(\rp, \rv, 0x74390000, 7439)
-32:		checkuart(\rp, \rv, 0x74450000, 7445)
+22:		checkuart(\rp, \rv, 0x07216400, 72164)
+23:		checkuart(\rp, \rv, 0x07216500, 72165)
+24:		checkuart(\rp, \rv, 0x72500000, 7250)
+25:		checkuart(\rp, \rv, 0x72550000, 7255)
+26:		checkuart(\rp, \rv, 0x72600000, 7260)
+27:		checkuart(\rp, \rv, 0x72680000, 7268)
+28:		checkuart(\rp, \rv, 0x72710000, 7271)
+29:		checkuart(\rp, \rv, 0x72780000, 7278)
+30:		checkuart(\rp, \rv, 0x73640000, 7364)
+31:		checkuart(\rp, \rv, 0x73660000, 7366)
+32:		checkuart(\rp, \rv, 0x07437100, 74371)
+33:		checkuart(\rp, \rv, 0x74390000, 7439)
+34:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0

arch/arm/mach-bcm/Kconfig

@@ -208,6 +208,7 @@ config ARCH_BRCMSTB
 	select ARM_GIC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
+	select BCM7038_L1_IRQ
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
 	select ARCH_HAS_HOLES_MEMORYMODEL