/ _| | |
| |_ __ _ | |_
| _| / _` | | __|
| | | (_| | | |_
|_| \__,_| \__|
Welcome to the Firmware Analysis Toolkit - v0.2
Offensive IoT Exploitation Training - http://offensiveiotexploitation.com
By Attify - https://attify.com | @attifyme
[?] Enter the name or absolute path of the firmware you want to analyse : wnap320.zip
[?] Enter the brand of the firmware : wnap320.zip
[+] Now going to extract the firmware. Hold on..
[+] Firmware : wnap320.zip
[+] Brand : netgear
/home/john/firmadyne/sources/extractor/extractor.py -b netgear -sql 127.0.0.1 -np -nk "wnap320.zip" images
[+] Database image ID : 1
[+] Identifying architecture
/home/john/firmadyne/scripts/getArch.sh ./images/1.tar.gz
[+] Architecture : mipseb
[+] Storing filesystem in database
[+] Building QEMU disk image
[+] Setting up the network connection, please standby
[+] Network interfaces : [('brtrunk', '192.168.0.100')]
[+] Running the firmware finally
[+] command line : sudo /home/john/firmadyne/scratch/1/run.sh
[*] Press ENTER to run the firmware...
Creating TAP device tap1_0...
Set 'tap1_0' persistent and owned by uid 0
Bringing up TAP device...
123456
Adding route to 192.168.0.100...
Starting firmware emulation... use Ctrl-a + x to exit
[ 0.000000] Linux version 2.6.32.70 (vagrant@vagrant-ubuntu-trusty-64) (gcc version 5.3.0 (GCC) ) #1 Thu Feb 18 01:39:21 UTC 2016
[ 0.000000]
[ 0.000000] LINUX started...
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019300 (MIPS 24Kc)
[ 0.000000] FPU revision is: 00739300
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 00001000 @ 00000000 (reserved)
[ 0.000000] memory: 000ef000 @ 00001000 (ROM data)
[ 0.000000] memory: 0061e000 @ 000f0000 (reserved)
[ 0.000000] memory: 0f8f1000 @ 0070e000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Wasting 57792 bytes for tracking 1806 unused pages
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000ffff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000ffff
[ 0.000000] On node 0 totalpages: 65535
[ 0.000000] free_area_init_node: node 0, pgdat 806aa3c0, node_mem_map 81000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60959 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65023
[ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0 nandsim.parts=64,64,64,64,64,64,64,64,64,64 rdinit=/firmadyne/preInit.sh rw debug ignore_loglevel print-fatal-signals=1 user_debug=31 firmadyne.syscall=0
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 252428k/254916k available (4260k kernel code, 2252k reserved, 1549k data, 220k init, 0k highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU frequency 200.00 MHz
[ 0.000000] Console: colour dummy device 80x25
[ 0.004000] Calibrating delay loop... 1126.40 BogoMIPS (lpj=2252800)
[ 0.104000] Mount-cache hash table entries: 512
[ 0.120000] NET: Registered protocol family 16
[ 0.132000] bio: create slab at 0
[ 0.132000] vgaarb: loaded
[ 0.136000] SCSI subsystem initialized
[ 0.136000] libata version 3.00 loaded.
[ 0.140000] usbcore: registered new interface driver usbfs
[ 0.140000] usbcore: registered new interface driver hub
[ 0.144000] usbcore: registered new device driver usb
[ 0.148000] pci 0000:00:00.0: reg 14 32bit mmio pref: [0x1000000-0x1ffffff]
[ 0.152000] pci 0000:00:0a.1: reg 20 io port: [0x00-0x0f]
[ 0.152000] pci 0000:00:0a.2: reg 20 io port: [0x00-0x1f]
[ 0.156000] pci 0000:00:0a.3: BAR 8: address space collision on of bridge [0x1100-0x110f]
[ 0.160000] pci 0000:00:0a.3: quirk: region 1100-110f claimed by PIIX4 SMB
[ 0.160000] pci 0000:00:0b.0: reg 10 io port: [0x00-0x1f]
[ 0.164000] pci 0000:00:0b.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.164000] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.168000] pci 0000:00:12.0: reg 10 io port: [0x00-0x1f]
[ 0.172000] pci 0000:00:12.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.172000] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.176000] pci 0000:00:13.0: reg 10 io port: [0x00-0x1f]
[ 0.176000] pci 0000:00:13.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.176000] pci 0000:00:13.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.180000] pci 0000:00:14.0: reg 10 io port: [0x00-0x1f]
[ 0.180000] pci 0000:00:14.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.180000] pci 0000:00:14.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.184000] pci 0000:00:15.0: reg 10 32bit mmio pref: [0x000000-0x1ffffff]
[ 0.184000] pci 0000:00:15.0: reg 14 32bit mmio: [0x000000-0x000fff]
[ 0.184000] pci 0000:00:15.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.188000] vgaarb: device added: PCI:0000:00:15.0,decodes=io+mem,owns=none,locks=none
[ 0.192000] pci 0000:00:0a.3: BAR 8: bogus alignment [0x1100-0x110f] flags 0x100
[ 0.200000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.204000] Switching to clocksource MIPS
[ 0.204000] NET: Registered protocol family 2
[ 0.208000] Switched to NOHz mode on CPU #0
[ 0.208000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.216000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.224000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.228000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.228000] TCP reno registered
[ 0.232000] NET: Registered protocol family 1
[ 0.232000] PCI: Enabling device 0000:00:0a.2 (0000 -> 0001)
[ 0.260000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.264000] Registering unionfs 2.6 (for 2.6.32.63)
[ 0.268000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.272000] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.272000] msgmni has been set to 493
[ 0.292000] alg: No test for stdrng (krng)
[ 0.324000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.328000] io scheduler noop registered
[ 0.328000] io scheduler cfq registered (default)
[ 0.332000] firmadyne: devfs: 1, execute: 1, procfs: 1, syscall: 0
[ 0.336000] firmadyne: Cannot register character device: watchdog, 0xa, 0x82!
[ 0.340000] firmadyne: Cannot register character device: wdt, 0xfd, 0x0!
[ 0.388000] PCI: Enabling device 0000:00:15.0 (0000 -> 0002)
[ 0.392000] cirrusfb 0000:00:15.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0x10000000
[ 0.640000] Console: switching to colour frame buffer device 80x30
[ 0.664000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.672000] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.676000] console [ttyS0] enabled, bootconsole disabled
[ 0.676000] console [ttyS0] enabled, bootconsole disabled
[ 0.688000] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.696000] brd: module loaded
[ 0.700000] loop: module loaded
[ 0.700000] ata_piix 0000:00:0a.1: version 2.13
[ 0.704000] PCI: Enabling device 0000:00:0a.1 (0000 -> 0001)
[ 0.708000] PCI: Setting latency timer of device 0000:00:0a.1 to 64
[ 0.720000] scsi0 : ata_piix
[ 0.724000] scsi1 : ata_piix
[ 0.724000] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
[ 0.728000] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
[ 0.740000] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
[ 0.744000] flash size: 128 MiB
[ 0.752000] page size: 512 bytes
[ 0.756000] OOB area size: 16 bytes
[ 0.756000] sector size: 16 KiB
[ 0.760000] pages number: 262144
[ 0.760000] pages per sector: 32
[ 0.764000] bus width: 8
[ 0.764000] bits in sector size: 14
[ 0.764000] bits in page size: 9
[ 0.768000] bits in OOB size: 4
[ 0.768000] flash size with OOB: 135168 KiB
[ 0.772000] page address bytes: 4
[ 0.772000] sector address bytes: 3
[ 0.776000] options: 0x62
[ 0.780000] Scanning device for bad blocks
[ 0.844000] Creating 11 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 0.852000] 0x000000000000-0x000000100000 : "NAND simulator partition 0"
[ 0.856000] 0x000000100000-0x000000200000 : "NAND simulator partition 1"
[ 0.860000] 0x000000200000-0x000000300000 : "NAND simulator partition 2"
[ 0.864000] 0x000000300000-0x000000400000 : "NAND simulator partition 3"
[ 0.868000] 0x000000400000-0x000000500000 : "NAND simulator partition 4"
[ 0.872000] 0x000000500000-0x000000600000 : "NAND simulator partition 5"
[ 0.876000] 0x000000600000-0x000000700000 : "NAND simulator partition 6"
[ 0.884000] 0x000000700000-0x000000800000 : "NAND simulator partition 7"
[ 0.888000] 0x000000800000-0x000000900000 : "NAND simulator partition 8"
[ 0.892000] 0x000000900000-0x000000a00000 : "NAND simulator partition 9"
[ 0.896000] 0x000000a00000-0x000008000000 : "NAND simulator partition 10"
[ 0.900000] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 0.904000] Copyright (c) 1999-2006 Intel Corporation.
[ 0.904000] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.908000] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.916000] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 0.920000] PCI: Enabling device 0000:00:0b.0 (0000 -> 0003)
[ 0.924000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.928000] pcnet32: PCnet/PCI II 79C970A at 0x1020, 52:54:00:12:34:56 assigned IRQ 10.
[ 0.932000] eth0: registered as PCnet/PCI II 79C970A
[ 0.936000] PCI: Enabling device 0000:00:12.0 (0000 -> 0003)
[ 0.940000] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 0.944000] pcnet32: PCnet/PCI II 79C970A at 0x1040, 52:54:00:12:34:57 assigned IRQ 10.
[ 0.952000] eth1: registered as PCnet/PCI II 79C970A
[ 0.956000] PCI: Enabling device 0000:00:13.0 (0000 -> 0003)
[ 0.960000] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 0.964000] pcnet32: PCnet/PCI II 79C970A at 0x1060, 52:54:00:12:34:58 assigned IRQ 10.
[ 0.968000] eth2: registered as PCnet/PCI II 79C970A
[ 0.972000] PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
[ 0.976000] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 0.984000] pcnet32: PCnet/PCI II 79C970A at 0x1080, 52:54:00:12:34:59 assigned IRQ 11.
[ 0.992000] eth3: registered as PCnet/PCI II 79C970A
[ 0.992000] pcnet32: 4 cards_found.
[ 0.996000] PPP generic driver version 2.4.2
[ 1.000000] PPP Deflate Compression module registered
[ 1.004000] ata1.01: NODEV after polling detection
[ 1.008000] ata2.01: NODEV after polling detection
[ 1.020000] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 1.024000] ata1.00: 2097152 sectors, multi 16: LBA48
[ 1.028000] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.032000] ata2.00: configured for UDMA/33
[ 1.036000] ata1.00: configured for UDMA/33
[ 1.044000] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 1.060000] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.068000] sd 0:0:0:0: [sda] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 1.072000] sd 0:0:0:0: [sda] Write Protect is off
[ 1.076000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.076000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.096000] sda: sda1
[ 1.104000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.112000] PPP MPPE Compression module registered
[ 1.116000] NET: Registered protocol family 24
[ 1.124000] PPPoL2TP kernel driver, V1.0
[ 1.124000] tun: Universal TUN/TAP device driver, 1.6
[ 1.128000] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 1.132000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.136000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.140000] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.144000] PCI: Setting latency timer of device 0000:00:0a.2 to 64
[ 1.152000] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[ 1.156000] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[ 1.160000] uhci_hcd 0000:00:0a.2: irq 11, io base 0x00001000
[ 1.164000] usb usb1: configuration #1 chosen from 1 choice
[ 1.168000] hub 1-0:1.0: USB hub found
[ 1.172000] hub 1-0:1.0: 2 ports detected
[ 1.172000] Initializing USB Mass Storage driver...
[ 1.176000] usbcore: registered new interface driver usb-storage
[ 1.180000] USB Mass Storage support registered.
[ 1.188000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.192000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.192000] mice: PS/2 mouse device common for all mice
[ 1.200000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.204000] rtc0: alarms up to one day, 242 bytes nvram
[ 1.208000] i2c /dev entries driver
[ 1.208000] piix4_smbus 0000:00:0a.3: SMBus Host Controller at 0x1100, revision 0
[ 1.212000] sdhci: Secure Digital Host Controller Interface driver
[ 1.220000] sdhci: Copyright(c) Pierre Ossman
[ 1.224000] usbcore: registered new interface driver hiddev
[ 1.228000] usbcore: registered new interface driver usbhid
[ 1.232000] usbhid: v2.6:USB HID core driver
[ 1.232000] Netfilter messages via NETLINK v0.30.
[ 1.236000] nf_conntrack version 0.5.0 (3947 buckets, 15788 max)
[ 1.240000] ctnetlink v0.93: registering with nfnetlink.
[ 1.240000] IPv4 over IPv4 tunneling driver
[ 1.244000] GRE over IPv4 tunneling driver
[ 1.252000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.256000] arp_tables: (C) 2002 David S. Miller
[ 1.260000] TCP cubic registered
[ 1.264000] Initializing XFRM netlink socket
[ 1.264000] NET: Registered protocol family 10
[ 1.272000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.272000] IPv6 over IPv4 tunneling driver
[ 1.276000] NET: Registered protocol family 17
[ 1.280000] Bridge firewalling registered
[ 1.284000] Ebtables v2.0 registered
[ 1.288000] 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com
[ 1.292000] All bugs added by David S. Miller davem@redhat.com
[ 1.296000] lib80211: common routines for IEEE802.11 drivers
[ 1.300000] lib80211_crypt: registered algorithm 'NULL'
[ 1.304000] rtc_cmos rtc_cmos: setting system clock to 2019-11-08 07:48:34 UTC (1573199314)
[ 1.308000] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.520000] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
main-loop: WARNING: I/O thread spun for 1000 iterations
[ 1.552000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 1.560000] VFS: Mounted root (ext2 filesystem) on device 8:1.
[ 1.564000] Freeing prom memory: 956k freed
[ 1.576000] Freeing unused kernel memory: 220k freed
456
[ 1.636000] firmadyne: sys_reboot[PID: 45 (init)]: magic1:fee1dead, magic2:28121969, cmd:0
[ 1.680000] firmadyne: do_execve: /firmadyne/console
[ 1.688000] OFFSETS: offset of pid: 0x100 offset of comm: 0x1f0
Mounting etc to ramfs. [DONE]
Mounting var to jffs2. [FAILED]
Checking SSH keys. [DONE]
[ 4.008000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
Checking for run file. [DONE]
Starting System Logger. [DONE]
Starting Kernel Logger. [ 5.052000] klogd/101: potentially unexpected fatal signal 10.
[ 5.056000]
[ 5.056000] Cpu 0
[ 5.056000] $ 0 : 00000000 00000001 00000008 ffffffff
[ 5.064000] $ 4 : 00000000 00000000 00000000 7fbe6f70
[ 5.068000] $ 8 : 00000000 00000000 00000000 7fbe6d98
[ 5.068000] $12 : 2ab3c868 2ab4f004 00000000 00000044
[ 5.072000] $16 : 7fbe6ed8 ffffffff 7fbe75e8 7fbe75e8
[ 5.076000] $20 : 7fbe758b 2ab4fc40 7fbe6fd0 00000000
[ 5.080000] $24 : 00000000 2ab25bc0
[ 5.080000] $28 : 2ab57440 7fbe6de8 ffffffff 2ab225c8
[ 5.084000] Hi : 00000001
[ 5.084000] Lo : 00000000
[ 5.088000] epc : 2ab22648 0x2ab22648
[ 5.088000] Not tainted
[ 5.092000] ra : 2ab225c8 0x2ab225c8
[ 5.096000] Status: 0000a413 USER EXL IE
[ 5.100000] Cause : 10800010
[ 5.100000] BadVA : ffffffff
[ 5.100000] PrId : 00019300 (MIPS 24Kc)
[DONE]
Starting Panel LED. [DONE]
Starting watchdog. Error in opening the device.
: No such device
[DONE]
Error in opening the device
: No such device
Starting Reset Detect. [DONE]
WN802T_SYS_RESET_DETECT_IOC returned err
Checking Manufac. data [DEFAULT]
Erase Total 1 Units
Performing Flash Erase of length 16384 at offset 0x0 done
[ 7.276000] nand_do_write_ops: Attempt to write not page aligned data
Error Writing device /dev/mtd5.
Checking board file. [CREATED]
Loading Ethernet module. [GENMAC]
BusyBox v1.11.0 (2011-06-23 15:54:48 IST) multi-call binary
Usage: ifconfig [-a] interface [address]
Configure a network interface
Options:
[[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]
[netmask ADDRESS] [dstaddr ADDRESS]
[outfill NN] [keepalive NN]
[hw ether|infiniband ADDRESS] [metric NN] [mtu NN]
[[-]trailers] [[-]arp] [[-]allmulti]
[multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]
[mem_start NN] [io_addr NN] [irq NN]
[up|down] ...
[DONE]
Checking database. [DONE]
Verifing checksum. [DONE]
Loading Bridge module. [DONE]
/etc/init.d/rcS: /etc/init.d/S020bridge.sh: line 39: cannot create /proc/sys/net/bridge/bridge-nf-enabled: nonexistent directory
Loading wlan modules. [DONE]
Creating vap interface. /usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
[DONE]
Creating wds interface. /usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
[DONE]
Starting configd. [DONE]
Starting web server. [DONE]
Starting Translator... start-stop-daemon: cannot start /usr/bin/log_ro: No such file or directory
[syslog]
Starting Translator... [password]
Starting Translator... [ssh]
Starting Translator... [snmp]
Starting Translator... [telnet]
Starting Translator... [dns]
Starting Translator... [ 18.548000] device eth0 entered promiscuous mode
[ 18.568000] eth0: link up
[ 18.572000] brtrunk: port 1(eth0) entering learning state
set cascaded bridge failed: Operation not supported
route: SIOCADDRT: Invalid argument
[bridge_and_vlan_translator]
Starting Translator... [ 18.840000] do_page_fault() #2: sending SIGSEGV to hostapd_tr for invalid read access from
[ 18.840000] 00000004 (epc == 2aafc7d0, ra == 00416804)
[ 18.848000] Cpu 0
[ 18.848000] $ 0 : 00000000 00000001 00000004 00000000
[ 18.852000] $ 4 : 00000004 00419f18 00000000 00000001
[ 18.856000] $ 8 : 2ab25004 0042e0b8 00000031 fffffff0
[ 18.860000] $12 : 8f04feb0 00000234 06ca3695 2aad9578
[ 18.864000] $16 : 7ffbd560 7ffbd3f0 7fbdf3e4 ffffffff
[ 18.868000] $20 : 7ffbd4b4 00401834 00000001 004019f0
[ 18.872000] $24 : 00000002 2aafc7d0
[ 18.876000] $28 : 00435880 7ffbce48 7ffbce48 00416804
[ 18.876000] Hi : 00000005
[ 18.880000] Lo : 19999999
[ 18.880000] epc : 2aafc7d0 0x2aafc7d0
[ 18.880000] Not tainted
[ 18.880000] ra : 00416804 0x416804
[ 18.884000] Status: 0000a413 USER EXL IE
[ 18.884000] Cause : 10800008
[ 18.884000] BadVA : 00000004
[ 18.888000] PrId : 00019300 (MIPS 24Kc)
[ 18.888000] Modules linked in:
[ 18.888000] Process hostapd_tr (pid: 519, threadinfo=8f04e000, task=8f03b6e0, tls=00000000)
[ 18.892000] Stack : 696e6773 3a646863 7073536e 64446e73 00435880 2e302e30 00000000 74656d3a
[ 18.900000] 64686370 73536574 7ffbce78 00402404 00419f18 0041a030 6e732030 2e302e30
[ 18.904000] 00435880 79737465 2f746d70 2f686f73 74617064 2e636f6e 662e7769 6669302e
[ 18.908000] 74656d70 00302e30 2e302e30 0a737973 74656d3a 64686370 73536574 74696e67
[ 18.912000] 733a6468 6370734c 65617365 54696d65 20383634 30300a0a 73797374 656d3a6c
[ 18.916000] ...
[ 18.916000] Call Trace:
[ 18.920000]
[ 18.920000]
[ 18.920000] Code: 00000000 00000000 00000000 <90830000> 90a20000 24840001 14600003 24a50001 03e00008
[ 18.928000] hostapd_tr/519: potentially unexpected fatal signal 11.
[ 18.928000]
[ 18.928000] Cpu 0
[ 18.932000] $ 0 : 00000000 00000001 00000004 00000000
[ 18.936000] $ 4 : 00000004 00419f18 00000000 00000001
[ 18.936000] $ 8 : 2ab25004 0042e0b8 00000031 fffffff0
[ 18.940000] $12 : 8f04feb0 00000234 06ca3695 2aad9578
[ 18.940000] $16 : 7ffbd560 7ffbd3f0 7fbdf3e4 ffffffff
[ 18.944000] $20 : 7ffbd4b4 00401834 00000001 004019f0
[ 18.944000] $24 : 00000002 2aafc7d0
[ 18.948000] $28 : 00435880 7ffbce48 7ffbce48 00416804
[ 18.948000] Hi : 00000005
[ 18.948000] Lo : 19999999
[ 18.952000] epc : 2aafc7d0 0x2aafc7d0
[ 18.952000] Not tainted
[ 18.952000] ra : 00416804 0x416804
[ 18.956000] Status: 0000a413 USER EXL IE
[ 18.960000] Cause : 10800008
[ 18.960000] BadVA : 00000004
[ 18.960000] PrId : 00019300 (MIPS 24Kc)
Segmentation fault
[hostapd_tr]
Starting Translator... [nmbd_tr]
Starting Translator... sh: cannot create /proc/sys/net/bridge/bridge-http-redirect-flush-mac: nonexistent directory
sh: cannot create /proc/sys/net/bridge/bridge-http-redirect-enabled: nonexistent directory
[http_redirect_tr]
Starting Translator... [dhcp]
Starting Translator... kill: cannot kill pid 594: No such process
[ntp]
Starting Translator... [timezone]
tarting Translator... [sc_radio]
kill: cannot kill pid 607: No such process
Error in opening the device.
: No such device
System initilization is .. [DONE...]
[ 20.432000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
[ 20.436000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
[ 20.444000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
Welcome to SDK.
Have a lot of fun...
netgear123456 login: [ 23.576000] brtrunk: port 1(eth0) entering forwarding state
[ 29.196000] brtrunk: no IPv6 routers present
[ 29.232000] eth0: no IPv6 routers present
[?] Enter the name or absolute path of the firmware you want to analyse : wnap320.zip
[?] Enter the brand of the firmware : wnap320.zip
[+] Now going to extract the firmware. Hold on..
[+] Firmware : wnap320.zip
[+] Brand : netgear
/home/john/firmadyne/sources/extractor/extractor.py -b netgear -sql 127.0.0.1 -np -nk "wnap320.zip" images
[+] Database image ID : 1
[+] Identifying architecture
/home/john/firmadyne/scripts/getArch.sh ./images/1.tar.gz
[+] Architecture : mipseb
[+] Storing filesystem in database
[+] Building QEMU disk image
[+] Setting up the network connection, please standby
[+] Network interfaces : [('brtrunk', '192.168.0.100')]
[+] Running the firmware finally
[+] command line : sudo /home/john/firmadyne/scratch/1/run.sh
[*] Press ENTER to run the firmware...
Creating TAP device tap1_0...
Set 'tap1_0' persistent and owned by uid 0
Bringing up TAP device...
123456
Adding route to 192.168.0.100...
Starting firmware emulation... use Ctrl-a + x to exit
[ 0.000000] Linux version 2.6.32.70 (vagrant@vagrant-ubuntu-trusty-64) (gcc version 5.3.0 (GCC) ) #1 Thu Feb 18 01:39:21 UTC 2016
[ 0.000000]
[ 0.000000] LINUX started...
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019300 (MIPS 24Kc)
[ 0.000000] FPU revision is: 00739300
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 00001000 @ 00000000 (reserved)
[ 0.000000] memory: 000ef000 @ 00001000 (ROM data)
[ 0.000000] memory: 0061e000 @ 000f0000 (reserved)
[ 0.000000] memory: 0f8f1000 @ 0070e000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Wasting 57792 bytes for tracking 1806 unused pages
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000ffff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000ffff
[ 0.000000] On node 0 totalpages: 65535
[ 0.000000] free_area_init_node: node 0, pgdat 806aa3c0, node_mem_map 81000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60959 pages, LIFO batch:15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65023
[ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0 nandsim.parts=64,64,64,64,64,64,64,64,64,64 rdinit=/firmadyne/preInit.sh rw debug ignore_loglevel print-fatal-signals=1 user_debug=31 firmadyne.syscall=0
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 252428k/254916k available (4260k kernel code, 2252k reserved, 1549k data, 220k init, 0k highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU frequency 200.00 MHz
[ 0.000000] Console: colour dummy device 80x25
[ 0.004000] Calibrating delay loop... 1126.40 BogoMIPS (lpj=2252800)
[ 0.104000] Mount-cache hash table entries: 512
[ 0.120000] NET: Registered protocol family 16
[ 0.132000] bio: create slab at 0
[ 0.132000] vgaarb: loaded
[ 0.136000] SCSI subsystem initialized
[ 0.136000] libata version 3.00 loaded.
[ 0.140000] usbcore: registered new interface driver usbfs
[ 0.140000] usbcore: registered new interface driver hub
[ 0.144000] usbcore: registered new device driver usb
[ 0.148000] pci 0000:00:00.0: reg 14 32bit mmio pref: [0x1000000-0x1ffffff]
[ 0.152000] pci 0000:00:0a.1: reg 20 io port: [0x00-0x0f]
[ 0.152000] pci 0000:00:0a.2: reg 20 io port: [0x00-0x1f]
[ 0.156000] pci 0000:00:0a.3: BAR 8: address space collision on of bridge [0x1100-0x110f]
[ 0.160000] pci 0000:00:0a.3: quirk: region 1100-110f claimed by PIIX4 SMB
[ 0.160000] pci 0000:00:0b.0: reg 10 io port: [0x00-0x1f]
[ 0.164000] pci 0000:00:0b.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.164000] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.168000] pci 0000:00:12.0: reg 10 io port: [0x00-0x1f]
[ 0.172000] pci 0000:00:12.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.172000] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.176000] pci 0000:00:13.0: reg 10 io port: [0x00-0x1f]
[ 0.176000] pci 0000:00:13.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.176000] pci 0000:00:13.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.180000] pci 0000:00:14.0: reg 10 io port: [0x00-0x1f]
[ 0.180000] pci 0000:00:14.0: reg 14 32bit mmio: [0x000000-0x00001f]
[ 0.180000] pci 0000:00:14.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 0.184000] pci 0000:00:15.0: reg 10 32bit mmio pref: [0x000000-0x1ffffff]
[ 0.184000] pci 0000:00:15.0: reg 14 32bit mmio: [0x000000-0x000fff]
[ 0.184000] pci 0000:00:15.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.188000] vgaarb: device added: PCI:0000:00:15.0,decodes=io+mem,owns=none,locks=none
[ 0.192000] pci 0000:00:0a.3: BAR 8: bogus alignment [0x1100-0x110f] flags 0x100
[ 0.200000] cfg80211: Calling CRDA to update world regulatory domain
[ 0.204000] Switching to clocksource MIPS
[ 0.204000] NET: Registered protocol family 2
[ 0.208000] Switched to NOHz mode on CPU #0
[ 0.208000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.216000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.224000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.228000] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.228000] TCP reno registered
[ 0.232000] NET: Registered protocol family 1
[ 0.232000] PCI: Enabling device 0000:00:0a.2 (0000 -> 0001)
[ 0.260000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.264000] Registering unionfs 2.6 (for 2.6.32.63)
[ 0.268000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.272000] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.272000] msgmni has been set to 493
[ 0.292000] alg: No test for stdrng (krng)
[ 0.324000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.328000] io scheduler noop registered
[ 0.328000] io scheduler cfq registered (default)
[ 0.332000] firmadyne: devfs: 1, execute: 1, procfs: 1, syscall: 0
[ 0.336000] firmadyne: Cannot register character device: watchdog, 0xa, 0x82!
[ 0.340000] firmadyne: Cannot register character device: wdt, 0xfd, 0x0!
[ 0.388000] PCI: Enabling device 0000:00:15.0 (0000 -> 0002)
[ 0.392000] cirrusfb 0000:00:15.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0x10000000
[ 0.640000] Console: switching to colour frame buffer device 80x30
[ 0.664000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.672000] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.676000] console [ttyS0] enabled, bootconsole disabled
[ 0.676000] console [ttyS0] enabled, bootconsole disabled
[ 0.688000] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.696000] brd: module loaded
[ 0.700000] loop: module loaded
[ 0.700000] ata_piix 0000:00:0a.1: version 2.13
[ 0.704000] PCI: Enabling device 0000:00:0a.1 (0000 -> 0001)
[ 0.708000] PCI: Setting latency timer of device 0000:00:0a.1 to 64
[ 0.720000] scsi0 : ata_piix
[ 0.724000] scsi1 : ata_piix
[ 0.724000] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
[ 0.728000] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
[ 0.740000] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit)
[ 0.744000] flash size: 128 MiB
[ 0.752000] page size: 512 bytes
[ 0.756000] OOB area size: 16 bytes
[ 0.756000] sector size: 16 KiB
[ 0.760000] pages number: 262144
[ 0.760000] pages per sector: 32
[ 0.764000] bus width: 8
[ 0.764000] bits in sector size: 14
[ 0.764000] bits in page size: 9
[ 0.768000] bits in OOB size: 4
[ 0.768000] flash size with OOB: 135168 KiB
[ 0.772000] page address bytes: 4
[ 0.772000] sector address bytes: 3
[ 0.776000] options: 0x62
[ 0.780000] Scanning device for bad blocks
[ 0.844000] Creating 11 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 0.852000] 0x000000000000-0x000000100000 : "NAND simulator partition 0"
[ 0.856000] 0x000000100000-0x000000200000 : "NAND simulator partition 1"
[ 0.860000] 0x000000200000-0x000000300000 : "NAND simulator partition 2"
[ 0.864000] 0x000000300000-0x000000400000 : "NAND simulator partition 3"
[ 0.868000] 0x000000400000-0x000000500000 : "NAND simulator partition 4"
[ 0.872000] 0x000000500000-0x000000600000 : "NAND simulator partition 5"
[ 0.876000] 0x000000600000-0x000000700000 : "NAND simulator partition 6"
[ 0.884000] 0x000000700000-0x000000800000 : "NAND simulator partition 7"
[ 0.888000] 0x000000800000-0x000000900000 : "NAND simulator partition 8"
[ 0.892000] 0x000000900000-0x000000a00000 : "NAND simulator partition 9"
[ 0.896000] 0x000000a00000-0x000008000000 : "NAND simulator partition 10"
[ 0.900000] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 0.904000] Copyright (c) 1999-2006 Intel Corporation.
[ 0.904000] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.908000] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.916000] pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 0.920000] PCI: Enabling device 0000:00:0b.0 (0000 -> 0003)
[ 0.924000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 0.928000] pcnet32: PCnet/PCI II 79C970A at 0x1020, 52:54:00:12:34:56 assigned IRQ 10.
[ 0.932000] eth0: registered as PCnet/PCI II 79C970A
[ 0.936000] PCI: Enabling device 0000:00:12.0 (0000 -> 0003)
[ 0.940000] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 0.944000] pcnet32: PCnet/PCI II 79C970A at 0x1040, 52:54:00:12:34:57 assigned IRQ 10.
[ 0.952000] eth1: registered as PCnet/PCI II 79C970A
[ 0.956000] PCI: Enabling device 0000:00:13.0 (0000 -> 0003)
[ 0.960000] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 0.964000] pcnet32: PCnet/PCI II 79C970A at 0x1060, 52:54:00:12:34:58 assigned IRQ 10.
[ 0.968000] eth2: registered as PCnet/PCI II 79C970A
[ 0.972000] PCI: Enabling device 0000:00:14.0 (0000 -> 0003)
[ 0.976000] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 0.984000] pcnet32: PCnet/PCI II 79C970A at 0x1080, 52:54:00:12:34:59 assigned IRQ 11.
[ 0.992000] eth3: registered as PCnet/PCI II 79C970A
[ 0.992000] pcnet32: 4 cards_found.
[ 0.996000] PPP generic driver version 2.4.2
[ 1.000000] PPP Deflate Compression module registered
[ 1.004000] ata1.01: NODEV after polling detection
[ 1.008000] ata2.01: NODEV after polling detection
[ 1.020000] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100
[ 1.024000] ata1.00: 2097152 sectors, multi 16: LBA48
[ 1.028000] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.032000] ata2.00: configured for UDMA/33
[ 1.036000] ata1.00: configured for UDMA/33
[ 1.044000] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 1.060000] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.068000] sd 0:0:0:0: [sda] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 1.072000] sd 0:0:0:0: [sda] Write Protect is off
[ 1.076000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.076000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.096000] sda: sda1
[ 1.104000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.112000] PPP MPPE Compression module registered
[ 1.116000] NET: Registered protocol family 24
[ 1.124000] PPPoL2TP kernel driver, V1.0
[ 1.124000] tun: Universal TUN/TAP device driver, 1.6
[ 1.128000] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 1.132000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.136000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.140000] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.144000] PCI: Setting latency timer of device 0000:00:0a.2 to 64
[ 1.152000] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[ 1.156000] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[ 1.160000] uhci_hcd 0000:00:0a.2: irq 11, io base 0x00001000
[ 1.164000] usb usb1: configuration #1 chosen from 1 choice
[ 1.168000] hub 1-0:1.0: USB hub found
[ 1.172000] hub 1-0:1.0: 2 ports detected
[ 1.172000] Initializing USB Mass Storage driver...
[ 1.176000] usbcore: registered new interface driver usb-storage
[ 1.180000] USB Mass Storage support registered.
[ 1.188000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.192000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.192000] mice: PS/2 mouse device common for all mice
[ 1.200000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.204000] rtc0: alarms up to one day, 242 bytes nvram
[ 1.208000] i2c /dev entries driver
[ 1.208000] piix4_smbus 0000:00:0a.3: SMBus Host Controller at 0x1100, revision 0
[ 1.212000] sdhci: Secure Digital Host Controller Interface driver
[ 1.220000] sdhci: Copyright(c) Pierre Ossman
[ 1.224000] usbcore: registered new interface driver hiddev
[ 1.228000] usbcore: registered new interface driver usbhid
[ 1.232000] usbhid: v2.6:USB HID core driver
[ 1.232000] Netfilter messages via NETLINK v0.30.
[ 1.236000] nf_conntrack version 0.5.0 (3947 buckets, 15788 max)
[ 1.240000] ctnetlink v0.93: registering with nfnetlink.
[ 1.240000] IPv4 over IPv4 tunneling driver
[ 1.244000] GRE over IPv4 tunneling driver
[ 1.252000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.256000] arp_tables: (C) 2002 David S. Miller
[ 1.260000] TCP cubic registered
[ 1.264000] Initializing XFRM netlink socket
[ 1.264000] NET: Registered protocol family 10
[ 1.272000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.272000] IPv6 over IPv4 tunneling driver
[ 1.276000] NET: Registered protocol family 17
[ 1.280000] Bridge firewalling registered
[ 1.284000] Ebtables v2.0 registered
[ 1.288000] 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com
[ 1.292000] All bugs added by David S. Miller davem@redhat.com
[ 1.296000] lib80211: common routines for IEEE802.11 drivers
[ 1.300000] lib80211_crypt: registered algorithm 'NULL'
[ 1.304000] rtc_cmos rtc_cmos: setting system clock to 2019-11-08 07:48:34 UTC (1573199314)
[ 1.308000] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.520000] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
main-loop: WARNING: I/O thread spun for 1000 iterations
[ 1.552000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 1.560000] VFS: Mounted root (ext2 filesystem) on device 8:1.
[ 1.564000] Freeing prom memory: 956k freed
[ 1.576000] Freeing unused kernel memory: 220k freed
456
[ 1.636000] firmadyne: sys_reboot[PID: 45 (init)]: magic1:fee1dead, magic2:28121969, cmd:0
[ 1.680000] firmadyne: do_execve: /firmadyne/console
[ 1.688000] OFFSETS: offset of pid: 0x100 offset of comm: 0x1f0
Mounting etc to ramfs. [DONE]
Mounting var to jffs2. [FAILED]
Checking SSH keys. [DONE]
[ 4.008000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
Checking for run file. [DONE]
Starting System Logger. [DONE]
Starting Kernel Logger. [ 5.052000] klogd/101: potentially unexpected fatal signal 10.
[ 5.056000]
[ 5.056000] Cpu 0
[ 5.056000] $ 0 : 00000000 00000001 00000008 ffffffff
[ 5.064000] $ 4 : 00000000 00000000 00000000 7fbe6f70
[ 5.068000] $ 8 : 00000000 00000000 00000000 7fbe6d98
[ 5.068000] $12 : 2ab3c868 2ab4f004 00000000 00000044
[ 5.072000] $16 : 7fbe6ed8 ffffffff 7fbe75e8 7fbe75e8
[ 5.076000] $20 : 7fbe758b 2ab4fc40 7fbe6fd0 00000000
[ 5.080000] $24 : 00000000 2ab25bc0
[ 5.080000] $28 : 2ab57440 7fbe6de8 ffffffff 2ab225c8
[ 5.084000] Hi : 00000001
[ 5.084000] Lo : 00000000
[ 5.088000] epc : 2ab22648 0x2ab22648
[ 5.088000] Not tainted
[ 5.092000] ra : 2ab225c8 0x2ab225c8
[ 5.096000] Status: 0000a413 USER EXL IE
[ 5.100000] Cause : 10800010
[ 5.100000] BadVA : ffffffff
[ 5.100000] PrId : 00019300 (MIPS 24Kc)
[DONE]
Starting Panel LED. [DONE]
Starting watchdog. Error in opening the device.
: No such device
[DONE]
Error in opening the device
: No such device
Starting Reset Detect. [DONE]
WN802T_SYS_RESET_DETECT_IOC returned err
Checking Manufac. data [DEFAULT]
Erase Total 1 Units
Performing Flash Erase of length 16384 at offset 0x0 done
[ 7.276000] nand_do_write_ops: Attempt to write not page aligned data
Error Writing device /dev/mtd5.
Checking board file. [CREATED]
Loading Ethernet module. [GENMAC]
Usage: ifconfig [-a] interface [address]
Configure a network interface
Options:
[[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]
[netmask ADDRESS] [dstaddr ADDRESS]
[outfill NN] [keepalive NN]
[hw ether|infiniband ADDRESS] [metric NN] [mtu NN]
[[-]trailers] [[-]arp] [[-]allmulti]
[multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]
[mem_start NN] [io_addr NN] [irq NN]
[up|down] ...
[DONE]
Checking database. [DONE]
Verifing checksum. [DONE]
Loading Bridge module. [DONE]
/etc/init.d/rcS: /etc/init.d/S020bridge.sh: line 39: cannot create /proc/sys/net/bridge/bridge-nf-enabled: nonexistent directory
Loading wlan modules. [DONE]
Creating vap interface. /usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFTXQLEN: No such device
[DONE]
Creating wds interface. /usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
/usr/local/bin/wlanconfig: ioctl: No such device
ifconfig: SIOCSIFMTU: No such device
[DONE]
Starting configd. [DONE]
Starting web server. [DONE]
Starting Translator... start-stop-daemon: cannot start /usr/bin/log_ro: No such file or directory
[syslog]
Starting Translator... [password]
Starting Translator... [ssh]
Starting Translator... [snmp]
Starting Translator... [telnet]
Starting Translator... [dns]
Starting Translator... [ 18.548000] device eth0 entered promiscuous mode
[ 18.568000] eth0: link up
[ 18.572000] brtrunk: port 1(eth0) entering learning state
set cascaded bridge failed: Operation not supported
route: SIOCADDRT: Invalid argument
[bridge_and_vlan_translator]
Starting Translator... [ 18.840000] do_page_fault() #2: sending SIGSEGV to hostapd_tr for invalid read access from
[ 18.840000] 00000004 (epc == 2aafc7d0, ra == 00416804)
[ 18.848000] Cpu 0
[ 18.848000] $ 0 : 00000000 00000001 00000004 00000000
[ 18.852000] $ 4 : 00000004 00419f18 00000000 00000001
[ 18.856000] $ 8 : 2ab25004 0042e0b8 00000031 fffffff0
[ 18.860000] $12 : 8f04feb0 00000234 06ca3695 2aad9578
[ 18.864000] $16 : 7ffbd560 7ffbd3f0 7fbdf3e4 ffffffff
[ 18.868000] $20 : 7ffbd4b4 00401834 00000001 004019f0
[ 18.872000] $24 : 00000002 2aafc7d0
[ 18.876000] $28 : 00435880 7ffbce48 7ffbce48 00416804
[ 18.876000] Hi : 00000005
[ 18.880000] Lo : 19999999
[ 18.880000] epc : 2aafc7d0 0x2aafc7d0
[ 18.880000] Not tainted
[ 18.880000] ra : 00416804 0x416804
[ 18.884000] Status: 0000a413 USER EXL IE
[ 18.884000] Cause : 10800008
[ 18.884000] BadVA : 00000004
[ 18.888000] PrId : 00019300 (MIPS 24Kc)
[ 18.888000] Modules linked in:
[ 18.888000] Process hostapd_tr (pid: 519, threadinfo=8f04e000, task=8f03b6e0, tls=00000000)
[ 18.892000] Stack : 696e6773 3a646863 7073536e 64446e73 00435880 2e302e30 00000000 74656d3a
[ 18.900000] 64686370 73536574 7ffbce78 00402404 00419f18 0041a030 6e732030 2e302e30
[ 18.904000] 00435880 79737465 2f746d70 2f686f73 74617064 2e636f6e 662e7769 6669302e
[ 18.908000] 74656d70 00302e30 2e302e30 0a737973 74656d3a 64686370 73536574 74696e67
[ 18.912000] 733a6468 6370734c 65617365 54696d65 20383634 30300a0a 73797374 656d3a6c
[ 18.916000] ...
[ 18.916000] Call Trace:
[ 18.920000]
[ 18.920000]
[ 18.920000] Code: 00000000 00000000 00000000 <90830000> 90a20000 24840001 14600003 24a50001 03e00008
[ 18.928000] hostapd_tr/519: potentially unexpected fatal signal 11.
[ 18.928000]
[ 18.928000] Cpu 0
[ 18.932000] $ 0 : 00000000 00000001 00000004 00000000
[ 18.936000] $ 4 : 00000004 00419f18 00000000 00000001
[ 18.936000] $ 8 : 2ab25004 0042e0b8 00000031 fffffff0
[ 18.940000] $12 : 8f04feb0 00000234 06ca3695 2aad9578
[ 18.940000] $16 : 7ffbd560 7ffbd3f0 7fbdf3e4 ffffffff
[ 18.944000] $20 : 7ffbd4b4 00401834 00000001 004019f0
[ 18.944000] $24 : 00000002 2aafc7d0
[ 18.948000] $28 : 00435880 7ffbce48 7ffbce48 00416804
[ 18.948000] Hi : 00000005
[ 18.948000] Lo : 19999999
[ 18.952000] epc : 2aafc7d0 0x2aafc7d0
[ 18.952000] Not tainted
[ 18.952000] ra : 00416804 0x416804
[ 18.956000] Status: 0000a413 USER EXL IE
[ 18.960000] Cause : 10800008
[ 18.960000] BadVA : 00000004
[ 18.960000] PrId : 00019300 (MIPS 24Kc)
Segmentation fault
[hostapd_tr]
Starting Translator... [nmbd_tr]
Starting Translator... sh: cannot create /proc/sys/net/bridge/bridge-http-redirect-flush-mac: nonexistent directory
sh: cannot create /proc/sys/net/bridge/bridge-http-redirect-enabled: nonexistent directory
[http_redirect_tr]
Starting Translator... [dhcp]
Starting Translator... kill: cannot kill pid 594: No such process
[ntp]
Starting Translator... [timezone]
tarting Translator... [sc_radio]
kill: cannot kill pid 607: No such process
Error in opening the device.
: No such device
System initilization is .. [DONE...]
[ 20.432000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
[ 20.436000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
[ 20.444000] EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 24646
Welcome to SDK.
Have a lot of fun...
netgear123456 login: [ 23.576000] brtrunk: port 1(eth0) entering forwarding state
[ 29.196000] brtrunk: no IPv6 routers present
[ 29.232000] eth0: no IPv6 routers present