ADC is not work

[badao520]

I had compiled a static library,and GPIO are confirmed available.
But,ADC is not work when I test for ADC. I can get value in
file: /sys/bus/iio/devices/iio:device0/in_voltage0_raw
I get the follwing information when I run the example. I had setup the SPI use setup_from_BBB. BLACKLIB-SPI0-00A0.dtbo and BLACKLIB-SPI1-00A0.dtbo files are ready in /lib/firmware.
Can you help me what can I do next?

[badao520]

I think this library is not work on up to debian 8 or up.

[TuxLeon]

When I remember right then this library only works with a specific Kernel version (something like 3.8).
Probably you may be able to install this version in your Debian.

[forwardkth]

The answer from beagleboard/linux#139
"Now when U-Boot has taken care of the overlays, the "slots" file is fully disabled. The current BlackLib v3 needs the "slots"file."

I have fixed the PWM in my fork of BlackLib which is updated to version 4 by integrating the C and C++ libs of Adafruit BBIO into BlackLib. And I am going to fix other BlackLib features later.
you can follow the link below:

https://github.com/forwardkth/BlackLib
https://github.com/forwardkth/BBRobot