build drivers

[breakersvd]

Hi
I installed Visual Studio Enterprise 2017 with WDK
then try to build the source but faced error [stampinf.exe is invalid] so i copied [stampinf.exe] from
[C:\Program Files (x86)\Windows Kits\10\bin\10.0.17134.0\x64\stampinf.exe] to [C:\Program Files (x86)\Windows Kits\10\bin\x86\stampinf.exe] so the error was fixed
then try to rebuild and no errors appeared but the output log was:

1>------ Build started: Project: UDEFX2, Configuration: Debug ARM ------
1>Building 'UDEFX2' with toolset 'WindowsKernelModeDriver10.0' and the 'Universal' target platform.
1>Stamping ARM\Debug\UDEFX2.inf
1>Stamping [Version] section with DriverVer=06/19/2018,4.52.59.813
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

so i don't know what the error.
could you please solve this problem to me or upload a ready compiled drivers on your PC ?

thanks in advance

[xxandy]

Hello! You’re building for ARM, I think that’s the reason for the build break. If you build Debug/x64, I think it will just work

…

Sent from my iPhone On Jun 18, 2018, at 7:02 PM, breakersvd <notifications@github.com<mailto:notifications@github.com>> wrote: Hi I installed Visual Studio Enterprise 2017 with WDK then try to build the source but faced error [stampinf.exe is invalid] so i copied [stampinf.exe] from [C:\Program Files (x86)\Windows Kits\10\bin\10.0.17134.0\x64\stampinf.exe] to [C:\Program Files (x86)\Windows Kits\10\bin\x86\stampinf.exe] so the error was fixed then try to rebuild and no errors appeared but the output log was: 1>------ Build started: Project: UDEFX2, Configuration: Debug ARM ------ 1>Building 'UDEFX2' with toolset 'WindowsKernelModeDriver10.0' and the 'Universal' target platform. 1>Stamping ARM\Debug\UDEFX2.inf 1>Stamping [Version] section with DriverVer=06/19/2018,4.52.59.813 ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== so i don't know what the error. could you please solve this problem to me or upload a ready compiled drivers on your PC ? thanks in advance — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fxxandy%2FUSB_UDE_Sample%2Fissues%2F6&data=02%7C01%7C%7C56e9f7e6b1674cf804d508d5d588b724%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636649705513660004&sdata=T%2BykVX099JAEhqKVLvmBOTkZgWphwCYJLZEAIpRxUiE%3D&reserved=0>, or mute the thread<https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FARXBeSOpPOytjV1SaVse8BunCQufT7kkks5t-Fu2gaJpZM4Usu7T&data=02%7C01%7C%7C56e9f7e6b1674cf804d508d5d588b724%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636649705513660004&sdata=5AxC%2FN%2FM6jx4SfIr4zigWdTwX5KNuL%2BQy3tG2zeW2nE%3D&reserved=0>.

[breakersvd]

Thanks for your respond,
I changed to x64 but it is the same:

1>------ Build started: Project: UDEFX2, Configuration: Debug x64 ------
1>Building 'UDEFX2' with toolset 'WindowsKernelModeDriver10.0' and the 'Universal' target platform.
1>Stamping x64\Debug\UDEFX2.inf
1>Stamping [Version] section with DriverVer=06/19/2018,23.46.27.109
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========

What can i do ?
@xxandy

[breakersvd]

Hi @xxandy
Finally i compiled the project successfully, Now please i just want to know how to create a virtual usb devices with Hardware IDS.

Is the way to use installem.bat after edit it with PID value (devcon.exe) ?

Please i need it

[breakersvd]

Helllllllllllllo ! @xxandy

[xxandy]

hey I'm so sorry I didn't get back, I've been busy with my day job. No need to get violent, dude.

First, you need to disable signature requirements by running these 2 commands within an admin window.
*** Important: if you have bitlocker on, be sure to save your recovery key
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
Then reboot your system (if you have bitlocker on, it will ask you for your key)

Then you can just run installem.bat from an administrator command window. You will need to get devcon.exe from the DDK.

[breakersvd]

I'm very sorry for my words, Forgive me.

I already disabled signature verification and run the "installem.bat" script then i found UDEX Device in "Device Management"

But my question is how to create a custom USB device with specified PID & VID values.

ex. if i want to create this device:

USB\VID_04E8&PID_6860&REV_0400&ADB
USB\VID_04E8&PID_6860&ADB
USB\SAMSUNG_MOBILE&ADB
USB\SAMSUNG_MOBILE&MI_03
USB\Vid_04E8&Pid_6860&MI_03
USB\Vid_04E8&Pid_6860&Class_FF&SubClass_42&Prot_01
USB\SAMSUNG_MOBILE&Class_FF&SubClass_42&Prot_01

Where must i put that values ?

I tried to edit "installem.bat" like this:

devcon.exe install hostude.inf "USB\VID_04E8&PID_6860&REV_0400&ADB"
devcon.exe install hostude.inf "USB\VID_04E8&PID_6860&ADB"
devcon.exe install hostude.inf "USB\SAMSUNG_MOBILE&ADB"
devcon.exe install hostude.inf "USB\SAMSUNG_MOBILE&MI_03"
devcon.exe install hostude.inf "USB\Vid_04E8&Pid_6860&MI_03"
devcon.exe install hostude.inf "USB\Vid_04E8&Pid_6860&Class_FF&SubClass_42&Prot_01"
devcon.exe install hostude.inf "USB\SAMSUNG_MOBILE&Class_FF&SubClass_42&Prot_01"

But all the above codes return with Failed result

So what i need to do to install virtual USB Device like that ?

I'm so sorry again, and thanks for answering.
@xxandy

[breakersvd]

Any answer please @xxandy

[xxandy]

Hi @breakersvd ,
You can't create a custom USB device with an arbitrary hardware ID.
The hardware ID you pass as a parameter to devcon.exe must match the hardware id that is defined within hostude.inf (or whatever inf file you use). Please examine installem.bat and my inf files carefully - you will see that they have matching hardware ids.

[breakersvd]

So what is the solution to create a custom USB device (i already see Flexihub program using the same idea to create a virtual usb device)

some of my tests i found this installed in Device Manager

@xxandy

[xxandy]

@breakersvd if you build the code in this repo and you use installem.bat without changing it at all, it will create a virtual USB device. You will see it in DeviceManager too.

That will be a test device, however, It only understand a few specific write/read requests, which are sent by the test application that builds together with this project.

So it is unclear to me what you are looking for. Are you perhaps trying to make the device perform a specific function? The code in this repo is not the solution for that.

[breakersvd]

@xxandy
all what i want is create device like this

[breakersvd]

@xxandy I'm waiting you my friend, Excuse me but i need that

[breakersvd]

@xxandy 😔

[xxandy]

@breakersvd , what function do you want the device to perform? For example, do you want the device to act as a communication gateway to your Android phone? Do you want the device to write to a USB disk? That's the question I attempted to ask 10 days ago...