Skip to content

Local-Development.md

Latest commit

 

History

History
173 lines (126 loc) · 8.51 KB

Local-Development.md

File metadata and controls

173 lines (126 loc) · 8.51 KB
Raw

Local Development

Local work uses the just recipes in the Justfile (which delegate to plain dotnet/bun commands) or the shared pipeline tool directly.

Tool installation

dotnet new tool-manifest   # only if the repository has no .config/dotnet-tools.json
dotnet tool install Purview.Build
dotnet purview-build

Purview.Build is an ordinary .NET local tool. The version is pinned in .config/dotnet-tools.json and dotnet tool restore installs it; pass --version to pin explicitly.

just recipes

Recipe Purpose
just build Build src/Build.slnx (Debug)
just test / just test-unit Run tests with a TUnit tree-node filter (unit filter: /*/*/*/*[Category=Unit])
just lint-check / just lint-fix CSharpier check / format
just pack dotnet pack with the current package.json version
just pipeline-pr Run the shared tool (restore, build, lint, tests)
just pipeline-build Run the shared tool without tests
just pipeline-release Run the shared tool with Release:Mode=NuGet
just pipeline-tests Run the shared tool with tests enabled
just pipeline-local-release Lint-fix, then run the shared tool with Release:Mode=LocalNuGet
just pipeline-dogfood Pack the tool from source, install it to a temp tool path, and run it against this repository
just test-eligibility The eligibility and config-resolution suites only
just lint-yaml actionlint over the workflow files (skipped with a note when not installed)
just clean-all / just scrub Clean build outputs

just pipeline-* runs dotnet tool restore, which installs the pinned Purview.Build from .config/dotnet-tools.json.

Answering "did I break anything?"

Recipe Purpose
just release-explain *args Explain the release decision for the working tree
just release-simulate ref version *args Explain the decision for a simulated ref and version
just release-matrix Run every eligibility scenario through the real CLI; non-zero on any mismatch
just config-matrix Run every config-resolution scenario through the real CLI
just release-explain-golden Regenerate the release-explain JSON golden file and show the diff

just release-matrix and just config-matrix are the two commands to run before opening a pull request that touches release behaviour. Both need no secrets and no network: every case supplies its own ref and tag list through Release:Context:*, which suppresses all process and network lookups. Both build the tool first (a restore is needed on a genuinely fresh clone) and then run the real binary, so the shipped CLI and the in-process evaluator are held to one specification — the same fixture files drive the TUnit suites:

  • src/tests/fixtures/eligibility-scenarios.json
  • src/tests/fixtures/config-resolution-scenarios.json

Adding a rule or a probe location means appending cases to those files, not writing test code.

Each run creates throwaway repositories under .scenario-runs/ (gitignored) and leaves the working tree untouched.

release-explain

Prints the release decision and exits 0 without running any module and without mutating anything. The decision's own exit code is reported inside the output, for a caller to act on.

just release-explain
just release-explain --config .config/purview-build.json
dotnet purview-build release-explain --format=json

It reports the resolved configuration path, the probe trail, any shadowed files, whether user configuration was active, the resolved release units, the selected policy and its fully resolved rule list, every rule in evaluation order with its verdict and message, the short-circuit point, the Release__Mode / Release:Publish / Release:GitHubRelease / feed URL that would result, and the ref it evaluated against with where that ref came from.

--format=json is the contract the reusable release workflow consumes. It is pinned by a golden file (src/tests/fixtures/release-explain.golden.json), because consuming repositories pin the workflow by ref: a change in shape or in a rule message is a change to a published contract.

Simulating a ref and version

just release-simulate refs/heads/main 1.1.0
just release-simulate refs/heads/release/2.0 2.0.2 --Release:Eligibility:Policy=TrunkReservesMinor
just release-simulate refs/heads/release/2.1 2.1.0-prerelease.1 --Release:Eligibility:Policy=TrunkReservesMinor

The output is clearly marked SIMULATED, and the real repository's branch and tags do not leak in — a simulated verdict must never be mistakable for a real one.

Safety interlocks

A local run cannot perform a real publish or create a tag:

  • release-explain never mutates anything.
  • If any Release:Context:* key is set and the run would really publish, the pipeline fails before any module runs, naming the conflict. Simulated context must never drive a real publish.
  • Release:DryRun=true runs the full pipeline but skips publishing and the GitHub release, logging what each would have done.
  • Release:Mode=LocalNuGet is honoured only when running locally and is ignored in CI.

End-to-end local rehearsal

Release:Mode=LocalNuGet is the natural rehearsal path. Install the tool to a separate tool path first — running the Release-configuration build against the binary that is executing it will fail on a locked file:

dotnet pack src/Build.slnx -c Release -o ./artifacts/dogfood \
    -p:Version=$(bun -p "require('./package.json').version") \
    -p:PackageVersion=$(bun -p "require('./package.json').version")
dotnet tool install Purview.Build --tool-path ./.tools/dogfood \
    --add-source ./artifacts/dogfood --version $(bun -p "require('./package.json').version")

LOCAL_NUGET_FEED_PATH=/tmp/purview-local-feed ./.tools/dogfood/purview-build --Release:Mode=LocalNuGet

just pipeline-dogfood does the pack-and-install part for you.

The rehearsal exercises Clean → Version → ReportEligibility → Restore → Build → Test → Lint → Pack → ValidatePack → local publish, and provably does not create a tag, create a GitHub release, or touch a remote feed: PublishNuGetModule and CreateGitHubReleaseModule both report Skipped, even when NUGET_APIKEY and GITHUB_TOKEN are present in the environment.

For a dry run against the real publication path instead:

./.tools/dogfood/purview-build --Release:Mode=NuGet --Release:DryRun=true

Both publish steps then log Would have … and perform no action.

Local NuGet publishing

Release:Mode=LocalNuGet pushes packages to a local feed and is only honoured when the tool runs locally — it is ignored in CI.

LOCAL_NUGET_FEED_PATH=C:/local/nuget-feed/ dotnet purview-build --Release:Mode=LocalNuGet

The local feed path must be an absolute path. just runs recipes through the shell, which strips backslashes from unquoted arguments, so a backslash-based Windows path is mangled before the tool sees it and is rejected. Use the LOCAL_NUGET_FEED_PATH environment variable, or forward slashes:

just pipeline-local-release --PublishLocalNuGet:LocalFeedPath=C:/local/nuget-feed/

By default the module overwrites existing packages, clears the NuGet global-packages and HTTP caches for the published packages, and shuts down the dotnet build server afterwards (all configurable under PublishLocalNuGet).

Repository root resolution

The tool locates the repository root by walking up from the current working directory to the nearest package.json. Run purview-build from within the repository. MODULAR_PIPELINES_DIRECTORY can override the directory containing the tool's shipped appsettings.json — it has nothing to do with locating purview-build.json, which has its own probe order.

Windows paths and just

just runs recipes through a shell that strips backslashes from unquoted arguments, so a backslash-based Windows path is mangled before the tool sees it. Use forward slashes, or the LOCAL_NUGET_FEED_PATH environment variable:

just pipeline-local-release --PublishLocalNuGet:LocalFeedPath=p:/_sync-projects/.local-nuget/

The local feed path must be absolute. A drive-relative path such as p:foo — the classic signature of stripped backslashes — is rejected with a remediation message rather than silently resolving against the current directory.

See also