diff --git a/src/orchestrations/execute_function_graph.rs b/src/orchestrations/execute_function_graph.rs
index ae23ce69..508a51c7 100644
--- a/src/orchestrations/execute_function_graph.rs
+++ b/src/orchestrations/execute_function_graph.rs
@@ -418,6 +418,12 @@ async fn execute_wait_schedule_node(
 /// Sentinel key used to signal a break from within a loop
 const BREAK_SENTINEL: &str = "__break__";
 
+/// Minimum wall-clock duration that every loop iteration must take before
+/// `continue_as_new` is called.  If the body (plus any while-condition
+/// evaluation) completes faster than this, a compensating timer makes up the
+/// deficit so an empty-bodied loop can't busy-spin via continue_as_new.
+const LOOP_MIN_ITER_DURATION: Duration = Duration::from_secs(1);
+
 /// Check if a result contains a break signal
 fn is_break_signal(result: &str) -> bool {
     serde_json::from_str::<serde_json::Value>(result)
@@ -451,6 +457,11 @@ async fn execute_loop_node(
         .as_ref()
         .ok_or_else(|| format!("LOOP node {node_id} has no body"))?;
 
+    // Capture the iteration start time so we can rate-limit `continue_as_new`
+    // below.  `utc_now()` is duroxide's deterministic clock (recorded in
+    // history and replayed verbatim), so this remains replay-safe.
+    let iter_started = ctx.utc_now().await.ok();
+
     ctx.trace_info("Executing loop iteration");
     let body_result = Box::pin(execute_function_node_with_vars(
         ctx, graph, body_id, results, exec_ctx,
@@ -495,6 +506,26 @@ async fn execute_loop_node(
     }
 
     ctx.trace_info("Continuing as new for next loop iteration");
+
+    // Enforce a minimum per-iteration wall-clock duration to prevent
+    // busy-looping (e.g. `df.loop(df.sleep(0))`).  Compute the elapsed time
+    // from the deterministic clock; if the iteration finished faster than
+    // LOOP_MIN_ITER_DURATION, schedule a timer for the deficit so the next
+    // continue_as_new is gated by at least that much real-clock time.
+    if let Some(started) = iter_started {
+        if let Ok(now) = ctx.utc_now().await {
+            let elapsed = now.duration_since(started).unwrap_or(Duration::ZERO);
+            if elapsed < LOOP_MIN_ITER_DURATION {
+                let deficit = LOOP_MIN_ITER_DURATION - elapsed;
+                ctx.trace_info(format!(
+                    "Loop iteration took {elapsed:?} (< {LOOP_MIN_ITER_DURATION:?}); \
+                     adding {deficit:?} rate-limit delay"
+                ));
+                ctx.schedule_timer(deficit).await;
+            }
+        }
+    }
+
     // Preserve vars in continue_as_new input
     let new_input = FunctionInput {
         instance_id: graph.instance_id.clone(),
diff --git a/tests/e2e/sql/03_loops.sql b/tests/e2e/sql/03_loops.sql
index b62a9871..26bcb04b 100644
--- a/tests/e2e/sql/03_loops.sql
+++ b/tests/e2e/sql/03_loops.sql
@@ -254,5 +254,76 @@ END $$;
 DROP TABLE _test_running_state;
 DROP TABLE test_running_status_log;
 
+-- === Test: zero_sleep_loop_rate_limited ===
+-- Regression test for: df.loop(df.sleep(0)) busy-spin (issue #13).
+-- A loop whose body contains only a zero-duration sleep must NOT spin at full
+-- CPU speed.  With the 1-second minimum-iteration delay enforced by the loop
+-- handler, at most a handful of iterations should complete in 3 seconds.
+
+DROP TABLE IF EXISTS test_zero_sleep_log;
+CREATE TABLE test_zero_sleep_log (id SERIAL, ts TIMESTAMP DEFAULT now());
+
+CREATE TEMP TABLE _test_zero_sleep_state AS
+SELECT df.start(
+    df.loop(
+        'INSERT INTO test_zero_sleep_log DEFAULT VALUES'
+        ~> df.sleep(0)
+    ),
+    'test-loop-zero-sleep'
+) AS instance_id;
+
+DO $$
+DECLARE
+    v_instance_id TEXT;
+    v_status      TEXT;
+    v_cnt         INT;
+    attempts      INT := 0;
+BEGIN
+    SELECT instance_id INTO v_instance_id FROM _test_zero_sleep_state;
+    RAISE NOTICE 'Test zero_sleep_loop_rate_limited: instance %', v_instance_id;
+
+    -- Wait until at least 1 iteration has run so the loop is clearly started.
+    LOOP
+        SELECT COUNT(*) INTO v_cnt FROM test_zero_sleep_log;
+        EXIT WHEN v_cnt >= 1 OR attempts > 100;
+        PERFORM pg_sleep(0.1);
+        attempts := attempts + 1;
+    END LOOP;
+
+    IF v_cnt < 1 THEN
+        RAISE EXCEPTION 'TEST FAILED [zero-sleep]: loop body never executed';
+    END IF;
+
+    -- Confirm the loop is still running (not failed/errored after the first iteration).
+    SELECT s INTO v_status FROM df.status(v_instance_id) s;
+    IF lower(v_status) != 'running' THEN
+        RAISE EXCEPTION 'TEST FAILED [zero-sleep]: expected running before observation window, got %', v_status;
+    END IF;
+
+    -- Let it run for ~3 more seconds and count iterations.
+    PERFORM pg_sleep(3);
+    SELECT COUNT(*) INTO v_cnt FROM test_zero_sleep_log;
+
+    -- Lower bound: the loop must have made meaningful progress.
+    IF v_cnt < 2 THEN
+        RAISE EXCEPTION 'TEST FAILED [zero-sleep]: only % iterations in ~3s; rate-limit may be too aggressive', v_cnt;
+    END IF;
+
+    -- With a 1-second minimum delay per continue_as_new, the loop cannot
+    -- complete more than ~4 iterations in 3 seconds (generous upper bound of
+    -- 15 to accommodate slow CI environments).  Without the fix it would run
+    -- hundreds of times in the same window.
+    IF v_cnt > 15 THEN
+        RAISE EXCEPTION 'TEST FAILED [zero-sleep]: % iterations in ~3s (expected <= 15); minimum rate-limit may not be working', v_cnt;
+    END IF;
+
+    RAISE NOTICE 'PASSED: zero_sleep_loop_rate_limited - % iterations in ~3s (within expected range)', v_cnt;
+
+    PERFORM df.cancel(v_instance_id, 'Test complete');
+END $$;
+
+DROP TABLE _test_zero_sleep_state;
+DROP TABLE test_zero_sleep_log;
+
 RESET SESSION AUTHORIZATION;
 SELECT 'TEST PASSED' AS result;