BRCP does not load on Vector (v2.0) - next generation zygisk/lsposed implementation

[nova2moon]

On A15 device, using Zygisk/Lsposed 1.10.2 API Version 100 the BypassRootCheckPro (BRCP) loads just fine and hides root properly.

Switching to Vector https://github.com/JingMatrix/Vector/releases/tag/v2.0 which is the next generation lsposed framework causes module to not remain enabled after reboot.

Suspect this should be easily reproducible since it happens on every try, also on Android 10 offcial MIUI ROM.

[hamedsbt]

Have you found any solutions or alternatives?

[nova2moon]

no, i think author or someone with knowledge/time needs to look at some code-change, all others load ok on vector..

[hamedsbt]

@nova2moon I've made a new one based on this project. I'll be share it on the GitHub tomorrow. If you'd like to have it earlier:
BypassRootCheckProVector.apk.zip

[nova2moon]

Install failed with:
mReturnMsg=Package com.gauravssnl.bypassrootcheck.pro signatures do not match previously installed version; ignoring!

So uninstalled original, then install went OK, activated + Framework, reboot, then. Vector home page shows:

API version 101..
but on the modules the BRCP is flagged with RED, saying:

This module requires a newer Xposed version (102) and thus cannot be activated

I suspect need to adjust down to 101?

[hamedsbt]

@nova2moon I tested it on v2.1.1 API 102, and it worked before I released it. I would say remove the module, then reboot and install my release. You can download v2.1.1 from their telegram channel: https://t.me/LSPosed/321

[nova2moon]

See original post, using the Vector implementation, see https://github.com/JingMatrix/Vector/releases
On front lsposed screen it says API version 101.
Possibly you are on newer device/android, such that only 102 is the minimum, whereas on my device A10, the minimum api is 101, as such if you compile to only 102 it won't work on those env.
I'm sure it works (on your end) otherwise you wouldn't share, just reporting test data from A10/Miui12 official rom.

[hamedsbt]

If you can install LSposed v2.1.1 (https://t.me/LSPosed/321) on your device, you'll be able to use my release.

[nova2moon]

Thanks for sure it works..
but.. based on AI "LSPosed v2.1.1 (build 7790) implements libxposed API 102 " and that means other modules will stop working that only go after 101 .. in time will move but now on this older phone, try to keep things on well tested turf.