2.0.0 Completely broken on ARM64

[SalmonSoup15]

Bambu Studio Version

2.0.0

Where is the application from?

Bambu Lab github releases

OS version

Windows 11 24H2 26100.3613 ARM64

Additional system information

1.x although slow, worked perfectly fine on ARM64 (specifically Snapdragon X Elite x1e-80-100) however with the 2.0.0 release, it simply says "loading configuration" for about 2 seconds and then closes. Nothing shows in task manager.

Printer

P1S AMS Combo

How to reproduce

1. Download and install on an ARM64 machine
2. Open Bambu Studio

Actual results

Shows loading screen for about 2 seconds, then closes. nothing shown in task manager.

Expected results

Bambu studio opens and works normally

Project file & Debug log uploads

Cant upload any relevant files as it never opens in the first place

Checklist of files to include

• Log file
• Project file

[lanewei120]

currently it is not supported on windows arm64
and we are trying to build an independent version

please just wait our finish

[begratefull]

Can confirm. Bambu Studio hasn't worked on ARM64 since 1.10, it worked before then... Guess I'm sticking with 1.09 until you finish supporting arm64.

[SalmonSoup15]

Thank you!

…

On Tue, Mar 25, 2025, 2:21 PM Lane.Wei ***@***.***> wrote: currently it is not supported on windows arm64 and we are trying to build an independent version please just wait our finish — Reply to this email directly, view it on GitHub <#6171 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BDOWY4F6OL2RFOVUZBZCYEL2WHXHXAVCNFSM6AAAAABZY4DXVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONJSHAZDCMZRGQ> . You are receiving this because you authored the thread.Message ID: ***@***.***> [image: lanewei120]*lanewei120* left a comment (bambulab/BambuStudio#6171) <#6171 (comment)> currently it is not supported on windows arm64 and we are trying to build an independent version please just wait our finish — Reply to this email directly, view it on GitHub <#6171 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BDOWY4F6OL2RFOVUZBZCYEL2WHXHXAVCNFSM6AAAAABZY4DXVOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDONJSHAZDCMZRGQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[SoCuul]

Can confirm. Bambu Studio hasn't worked on ARM64 since 1.10, it worked before then... Guess I'm sticking with 1.09 until you finish supporting arm64.

Is there a reason you can't use the x64 build with window's built in x86 emulation for arm?

[SalmonSoup15]

Is there a reason you can't use the x64 build with window's built in x86 emulation for arm?

Thats what we're trying, it just doesn't work with 1.10 and above

[RyanEwen]

OrcaSlicer still works fortunately, for what that's worth

[konzolec]

Orca is the way then.

[Goodwine]

duplicate of #6014

[Goodwine]

OrcaSlicer still works fortunately, for what that's worth

not if the printer has the new firmware that blocks unauthenticated MQTT packets

[RyanEwen]

OrcaSlicer still works fortunately, for what that's worth

not if the printer has the new firmware that blocks unauthenticated MQTT packets

Considering Bambu won't even launch, I can at least use Orca to slice a file and get it onto the printer in other ways.

Probably worth mentioning, Bambu Connect doesn't launch on ARM either.

[lanewei120]

please check #6014 (comment)
for the current solution

we will fix it in next version

[lanewei120]

fixed by v2.0.2.57(https://github.com/bambulab/BambuStudio/releases/tag/v02.00.02.57)