Merge tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information

Author: torvalds

Documentation/ABI/testing/sysfs-bus-iio-timer-stm32

@@ -109,30 +109,6 @@ Description:
 		When counting down the counter start from preset value
 		and fire event when reach 0.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.12
-Contact:	benjamin.gaignard@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		channel_A:
-			Encoder A input servers as the count input and B as
-			the UP/DOWN direction control input.
-
-		channel_B:
-			Encoder B input serves as the count input and A as
-			the UP/DOWN direction control input.
-
-		quadrature:
-			Encoder A and B inputs are mixed to get direction
-			and count with a scale of 0.25.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com

drivers/counter/ti-eqep.c

@@ -368,15 +368,15 @@ static const struct regmap_config ti_eqep_regmap32_config = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
-	.max_register = 0x24,
+	.max_register = QUPRD,
 };
 
 static const struct regmap_config ti_eqep_regmap16_config = {
 	.name = "16-bit",
 	.reg_bits = 16,
 	.val_bits = 16,
 	.reg_stride = 2,
-	.max_register = 0x1e,
+	.max_register = QCPRDLAT,
 };
 
 static int ti_eqep_probe(struct platform_device *pdev)

drivers/iio/accel/kxcjk-1013.c

@@ -126,6 +126,12 @@ enum kx_chipset {
 	KX_MAX_CHIPS /* this must be last */
 };
 
+enum kx_acpi_type {
+	ACPI_GENERIC,
+	ACPI_SMO8500,
+	ACPI_KIOX010A,
+};
+
 struct kxcjk1013_data {
 	struct i2c_client *client;
 	struct iio_trigger *dready_trig;
@@ -143,7 +149,7 @@ struct kxcjk1013_data {
 	bool motion_trigger_on;
 	int64_t timestamp;
 	enum kx_chipset chipset;
-	bool is_smo8500_device;
+	enum kx_acpi_type acpi_type;
 };
 
 enum kxcjk1013_axis {
@@ -270,6 +276,32 @@ static const struct {
 			      {19163, 1, 0},
 			      {38326, 0, 1} };
 
+#ifdef CONFIG_ACPI
+enum kiox010a_fn_index {
+	KIOX010A_SET_LAPTOP_MODE = 1,
+	KIOX010A_SET_TABLET_MODE = 2,
+};
+
+static int kiox010a_dsm(struct device *dev, int fn_index)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+	guid_t kiox010a_dsm_guid;
+	union acpi_object *obj;
+
+	if (!handle)
+		return -ENODEV;
+
+	guid_parse("1f339696-d475-4e26-8cad-2e9f8e6d7a91", &kiox010a_dsm_guid);
+
+	obj = acpi_evaluate_dsm(handle, &kiox010a_dsm_guid, 1, fn_index, NULL);
+	if (!obj)
+		return -EIO;
+
+	ACPI_FREE(obj);
+	return 0;
+}
+#endif
+
 static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
 			      enum kxcjk1013_mode mode)
 {
@@ -347,6 +379,13 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
 {
 	int ret;
 
+#ifdef CONFIG_ACPI
+	if (data->acpi_type == ACPI_KIOX010A) {
+		/* Make sure the kbd and touchpad on 2-in-1s using 2 KXCJ91008-s work */
+		kiox010a_dsm(&data->client->dev, KIOX010A_SET_LAPTOP_MODE);
+	}
+#endif
+
 	ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_WHO_AM_I);
 	if (ret < 0) {
 		dev_err(&data->client->dev, "Error reading who_am_i\n");
@@ -1247,7 +1286,7 @@ static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
 
 static const char *kxcjk1013_match_acpi_device(struct device *dev,
 					       enum kx_chipset *chipset,
-					       bool *is_smo8500_device)
+					       enum kx_acpi_type *acpi_type)
 {
 	const struct acpi_device_id *id;
 
@@ -1256,7 +1295,9 @@ static const char *kxcjk1013_match_acpi_device(struct device *dev,
 		return NULL;
 
 	if (strcmp(id->id, "SMO8500") == 0)
-		*is_smo8500_device = true;
+		*acpi_type = ACPI_SMO8500;
+	else if (strcmp(id->id, "KIOX010A") == 0)
+		*acpi_type = ACPI_KIOX010A;
 
 	*chipset = (enum kx_chipset)id->driver_data;
 
@@ -1299,7 +1340,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
 	} else if (ACPI_HANDLE(&client->dev)) {
 		name = kxcjk1013_match_acpi_device(&client->dev,
 						   &data->chipset,
-						   &data->is_smo8500_device);
+						   &data->acpi_type);
 	} else
 		return -ENODEV;
 
@@ -1316,7 +1357,7 @@ static int kxcjk1013_probe(struct i2c_client *client,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &kxcjk1013_info;
 
-	if (client->irq > 0 && !data->is_smo8500_device) {
+	if (client->irq > 0 && data->acpi_type != ACPI_SMO8500) {
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						kxcjk1013_data_rdy_trig_poll,
 						kxcjk1013_event_handler,

drivers/iio/adc/ingenic-adc.c

@@ -71,7 +71,7 @@
 #define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS	10
 #define JZ4740_ADC_BATTERY_HIGH_VREF		(7500 * 0.986)
 #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS	12
-#define JZ4770_ADC_BATTERY_VREF			6600
+#define JZ4770_ADC_BATTERY_VREF			1200
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
 #define JZ_ADC_IRQ_AUX			BIT(0)
@@ -177,13 +177,12 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc,
 	mutex_unlock(&adc->lock);
 }
 
-static void ingenic_adc_enable(struct ingenic_adc *adc,
-			       int engine,
-			       bool enabled)
+static void ingenic_adc_enable_unlocked(struct ingenic_adc *adc,
+					int engine,
+					bool enabled)
 {
 	u8 val;
 
-	mutex_lock(&adc->lock);
 	val = readb(adc->base + JZ_ADC_REG_ENABLE);
 
 	if (enabled)
@@ -192,20 +191,41 @@ static void ingenic_adc_enable(struct ingenic_adc *adc,
 		val &= ~BIT(engine);
 
 	writeb(val, adc->base + JZ_ADC_REG_ENABLE);
+}
+
+static void ingenic_adc_enable(struct ingenic_adc *adc,
+			       int engine,
+			       bool enabled)
+{
+	mutex_lock(&adc->lock);
+	ingenic_adc_enable_unlocked(adc, engine, enabled);
 	mutex_unlock(&adc->lock);
 }
 
 static int ingenic_adc_capture(struct ingenic_adc *adc,
 			       int engine)
 {
+	u32 cfg;
 	u8 val;
 	int ret;
 
-	ingenic_adc_enable(adc, engine, true);
+	/*
+	 * Disable CMD_SEL temporarily, because it causes wrong VBAT readings,
+	 * probably due to the switch of VREF. We must keep the lock here to
+	 * avoid races with the buffer enable/disable functions.
+	 */
+	mutex_lock(&adc->lock);
+	cfg = readl(adc->base + JZ_ADC_REG_CFG);
+	writel(cfg & ~JZ_ADC_REG_CFG_CMD_SEL, adc->base + JZ_ADC_REG_CFG);
+
+	ingenic_adc_enable_unlocked(adc, engine, true);
 	ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val,
 				 !(val & BIT(engine)), 250, 1000);
 	if (ret)
-		ingenic_adc_enable(adc, engine, false);
+		ingenic_adc_enable_unlocked(adc, engine, false);
+
+	writel(cfg, adc->base + JZ_ADC_REG_CFG);
+	mutex_unlock(&adc->lock);
 
 	return ret;
 }

drivers/iio/adc/mt6577_auxadc.c

@@ -9,9 +9,9 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/iopoll.h>
 #include <linux/io.h>
 #include <linux/iio/iio.h>
@@ -276,6 +276,8 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
 		goto err_disable_clk;
 	}
 
+	adc_dev->dev_comp = device_get_match_data(&pdev->dev);
+
 	mutex_init(&adc_dev->lock);
 
 	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,

drivers/iio/adc/stm32-adc-core.c

@@ -41,18 +41,16 @@
  * struct stm32_adc_common_regs - stm32 common registers
  * @csr:	common status register offset
  * @ccr:	common control register offset
- * @eoc1_msk:	adc1 end of conversion flag in @csr
- * @eoc2_msk:	adc2 end of conversion flag in @csr
- * @eoc3_msk:	adc3 end of conversion flag in @csr
+ * @eoc_msk:    array of eoc (end of conversion flag) masks in csr for adc1..n
+ * @ovr_msk:    array of ovr (overrun flag) masks in csr for adc1..n
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
 struct stm32_adc_common_regs {
 	u32 csr;
 	u32 ccr;
-	u32 eoc1_msk;
-	u32 eoc2_msk;
-	u32 eoc3_msk;
+	u32 eoc_msk[STM32_ADC_MAX_ADCS];
+	u32 ovr_msk[STM32_ADC_MAX_ADCS];
 	u32 ier;
 	u32 eocie_msk;
 };
@@ -282,21 +280,20 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.csr = STM32F4_ADC_CSR,
 	.ccr = STM32F4_ADC_CCR,
-	.eoc1_msk = STM32F4_EOC1 | STM32F4_OVR1,
-	.eoc2_msk = STM32F4_EOC2 | STM32F4_OVR2,
-	.eoc3_msk = STM32F4_EOC3 | STM32F4_OVR3,
+	.eoc_msk = { STM32F4_EOC1, STM32F4_EOC2, STM32F4_EOC3},
+	.ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3},
 	.ier = STM32F4_ADC_CR1,
-	.eocie_msk = STM32F4_EOCIE | STM32F4_OVRIE,
+	.eocie_msk = STM32F4_EOCIE,
 };
 
 /* STM32H7 common registers definitions */
 static const struct stm32_adc_common_regs stm32h7_adc_common_regs = {
 	.csr = STM32H7_ADC_CSR,
 	.ccr = STM32H7_ADC_CCR,
-	.eoc1_msk = STM32H7_EOC_MST | STM32H7_OVR_MST,
-	.eoc2_msk = STM32H7_EOC_SLV | STM32H7_OVR_SLV,
+	.eoc_msk = { STM32H7_EOC_MST, STM32H7_EOC_SLV},
+	.ovr_msk = { STM32H7_OVR_MST, STM32H7_OVR_SLV},
 	.ier = STM32H7_ADC_IER,
-	.eocie_msk = STM32H7_EOCIE | STM32H7_OVRIE,
+	.eocie_msk = STM32H7_EOCIE,
 };
 
 static const unsigned int stm32_adc_offset[STM32_ADC_MAX_ADCS] = {
@@ -318,6 +315,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 {
 	struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
+	int i;
 	u32 status;
 
 	chained_irq_enter(chip, desc);
@@ -335,17 +333,12 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
 	 * before invoking the interrupt handler (e.g. call ISR only for
 	 * IRQ-enabled ADCs).
 	 */
-	if (status & priv->cfg->regs->eoc1_msk &&
-	    stm32_adc_eoc_enabled(priv, 0))
-		generic_handle_irq(irq_find_mapping(priv->domain, 0));
-
-	if (status & priv->cfg->regs->eoc2_msk &&
-	    stm32_adc_eoc_enabled(priv, 1))
-		generic_handle_irq(irq_find_mapping(priv->domain, 1));
-
-	if (status & priv->cfg->regs->eoc3_msk &&
-	    stm32_adc_eoc_enabled(priv, 2))
-		generic_handle_irq(irq_find_mapping(priv->domain, 2));
+	for (i = 0; i < priv->cfg->num_irqs; i++) {
+		if ((status & priv->cfg->regs->eoc_msk[i] &&
+		     stm32_adc_eoc_enabled(priv, i)) ||
+		     (status & priv->cfg->regs->ovr_msk[i]))
+			generic_handle_irq(irq_find_mapping(priv->domain, i));
+	}
 
 	chained_irq_exit(chip, desc);
 };