Merge tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "A fairly quiet release for SPI, nothing really going on in the core
  although there's been quite a bit of driver related activity.

  This includes the addition of some shared code in drivers/memory for
  the Renesas RPC-IF which is used by a newly added SPI driver, the
  memory subsystem doesn't seem to have a fixed maintainer at the minute
  and this seemed like the most sensible way to get that hardware
  supported.

   - Quite a few cleanups and optimizations for the Altera, Qualcomm
     GENI, sun6i and lantiq drivers.

   - Several more GPIO descriptor conversions.

   - Move the Cadence QuadSPI driver from drivers/mtd to drivers/spi.

   - New support for Mediatek MT8192 and Renesas RPC-IF, R8A7742 and
     R8A774e1"

* tag 'spi-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
  dt-bindings: lpspi: New property in document DT bindings for LPSPI
  spi: lpspi: fix using CS discontinuously on i.MX8DXLEVK
  spi: lpspi: remove unused fsl_lpspi->chipselect
  spi: lpspi: Fix kernel warning dump when probe fail after calling spi_register
  spi: rockchip: Fix error in SPI slave pio read
  spi: rockchip: Support 64-location deep FIFOs
  spi: rockchip: Config spi rx dma burst size depend on xfer length
  spi: spi-topcliff-pch: drop call to wakeup-disable
  spi: spidev: Align buffers for DMA
  spi: correct kernel-doc inconsistency
  spi: sun4i: update max transfer size reported
  spi: imx: enable runtime pm support
  spi: update bindings for MT8192 SoC
  spi: mediatek: add spi support for mt8192 IC
  spi: Add bindings for Lightning Mountain SoC
  spi: lantiq: Add support to Lightning Mountain SoC
  spi: lantiq: Move interrupt configuration to SoC specific data structure
  spi: lantiq: Add fifo size bit mask in SoC specific data structure
  spi: lantiq: Add support to acknowledge interrupt
  spi: lantiq: Move interrupt control register offesets to SoC specific data structure
  ...

Author: torvalds

Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml

@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+  be accessed via the external address space read mode or the manual mode.
+
+  The flash chip itself should be represented by a subnode of the RPC-IF node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  - if it contains "jedec,spi-nor", then SPI is used;
+  - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,r8a77970-rpc-if       # R-Car V3M
+        - renesas,r8a77980-rpc-if       # R-Car V3H
+        - renesas,r8a77995-rpc-if       # R-Car D3
+      - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+
+  reg:
+    items:
+      - description: RPC-IF registers
+      - description: direct mapping read mode area
+      - description: write buffer area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+      - const: wbuf
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - cfi-flash
+          - jedec,spi-nor
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77995-sysc.h>
+
+    spi@ee200000 {
+      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+      reg = <0xee200000 0x200>,
+            <0x08000000 0x4000000>,
+            <0xee208000 0x100>;
+      reg-names = "regs", "dirmap", "wbuf";
+      clocks = <&cpg CPG_MOD 917>;
+      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+      resets = <&cpg 917>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-max-frequency = <40000000>;
+        spi-tx-bus-width = <1>;
+        spi-rx-bus-width = <1>;
+      };
+    };

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-cspi
+      - const: fsl,imx21-cspi
+      - const: fsl,imx27-cspi
+      - const: fsl,imx31-cspi
+      - const: fsl,imx35-cspi
+      - const: fsl,imx51-ecspi
+      - const: fsl,imx53-ecspi
+      - items:
+        - enum:
+          - fsl,imx50-ecspi
+          - fsl,imx6q-ecspi
+          - fsl,imx6sx-ecspi
+          - fsl,imx6sl-ecspi
+          - fsl,imx6sll-ecspi
+          - fsl,imx6ul-ecspi
+          - fsl,imx7d-ecspi
+          - fsl,imx8mq-ecspi
+          - fsl,imx8mm-ecspi
+          - fsl,imx8mn-ecspi
+          - fsl,imx8mp-ecspi
+        - const: fsl,imx51-ecspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC SPI ipg clock
+      - description: SoC SPI per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  fsl,spi-rdy-drctl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Integer, representing the value of DRCTL, the register controlling
+      the SPI_READY handling. Note that to enable the DRCTL consideration,
+      the SPI_READY mode-flag needs to be set too.
+      Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    spi@70010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx51-ecspi";
+        reg = <0x70010000 0x4000>;
+        interrupts = <36>;
+        clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+                 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+        clock-names = "ipg", "per";
+    };

Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MX233/MX28 SSP/SPI
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-spi
+      - fsl,imx28-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
+  clock-frequency:
+    description: input clock frequency to the SPI block in Hz.
+    default: 160000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@80010000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx28-spi";
+        reg = <0x80010000 0x2000>;
+        interrupts = <96>;
+        dmas = <&dma_apbh 0>;
+        dma-names = "rx-tx";
+    };

Documentation/devicetree/bindings/spi/mxs-spi.txt

@@ -21,6 +21,7 @@ properties:
                                             # device
       - items:
           - enum:
+              - renesas,msiof-r8a7742       # RZ/G1H
               - renesas,msiof-r8a7743       # RZ/G1M
               - renesas,msiof-r8a7744       # RZ/G1N
               - renesas,msiof-r8a7745       # RZ/G1E
@@ -37,6 +38,7 @@ properties:
               - renesas,msiof-r8a774a1      # RZ/G2M
               - renesas,msiof-r8a774b1      # RZ/G2N
               - renesas,msiof-r8a774c0      # RZ/G2E
+              - renesas,msiof-r8a774e1      # RZ/G2H
               - renesas,msiof-r8a7795       # R-Car H3
               - renesas,msiof-r8a7796       # R-Car M3-W
               - renesas,msiof-r8a77965      # R-Car M3-N

Documentation/devicetree/bindings/spi/mxs-spi.yaml

@@ -1,8 +1,8 @@
 Davinci SPI controller device bindings
 
 Links on DM:
-Keystone 2 - http://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
-dm644x - http://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
+Keystone 2 - https://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
+dm644x - https://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
 OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
 
 Required properties: