fix spelling mistake

Author: c-morley

src/emc/rs274ngc/interp_cycles.cc

@@ -154,7 +154,7 @@ int Interp::convert_cycle_g83(block_pointer block,
      Thanks to Billy Singleton for pointing it out... */
   CHKS((delta <= 0.0), NCE_NEGATIVE_OR_ZERO_Q_VALUE_USED);
 
-  rapid_delta = _setup.parameter_g83_peck_clearence;;
+  rapid_delta = _setup.parameter_g83_peck_clearance;;
 
   for (current_depth = (r - delta);
        current_depth > bottom_z; current_depth = (current_depth - delta)) {
@@ -215,7 +215,7 @@ int Interp::convert_cycle_g73(block_pointer block,
      Thanks to Billy Singleton for pointing it out... */
   CHKS((delta <= 0.0), NCE_NEGATIVE_OR_ZERO_Q_VALUE_USED);
 
-  rapid_delta = _setup.parameter_g73_peck_clearence;
+  rapid_delta = _setup.parameter_g73_peck_clearance;
 
   for (current_depth = (r - delta);
     current_depth > bottom_z; current_depth = (current_depth - delta)) {

src/emc/rs274ngc/interp_internal.hh

@@ -789,8 +789,8 @@ struct setup
   int tool_change_at_g30;
   int tool_change_quill_up;
   int tool_change_with_spindle_on;
-  double parameter_g73_peck_clearence;
-  double parameter_g83_peck_clearence;
+  double parameter_g73_peck_clearance;
+  double parameter_g83_peck_clearance;
   int a_axis_wrapped;
   int b_axis_wrapped;
   int c_axis_wrapped;

src/emc/rs274ngc/interpmodule.cc

@@ -816,17 +816,17 @@ static inline int get_tool_change_with_spindle_on(Interp &interp)  {
 static inline void set_tool_change_with_spindle_on(Interp &interp, int value)  {
     interp._setup.tool_change_with_spindle_on = value;
 }
-static inline double get_parameter_g73_peck_clearence (Interp &interp)  {
-    return interp._setup.parameter_g73_peck_clearence;
+static inline double get_parameter_g73_peck_clearance (Interp &interp)  {
+    return interp._setup.parameter_g73_peck_clearance;
 }
-static inline void set_parameter_g73_peck_clearence(Interp &interp, double value)  {
-    interp._setup.parameter_g73_peck_clearence = value;
+static inline void set_parameter_g73_peck_clearance(Interp &interp, double value)  {
+    interp._setup.parameter_g73_peck_clearance = value;
 }
-static inline double get_parameter_g83_peck_clearence (Interp &interp)  {
-    return interp._setup.parameter_g83_peck_clearence;
+static inline double get_parameter_g83_peck_clearance (Interp &interp)  {
+    return interp._setup.parameter_g83_peck_clearance;
 }
-static inline void set_parameter_g83_peck_clearence(Interp &interp, double value)  {
-    interp._setup.parameter_g83_peck_clearence = value;
+static inline void set_parameter_g83_peck_clearance(Interp &interp, double value)  {
+    interp._setup.parameter_g83_peck_clearance = value;
 }
 
 BOOST_PYTHON_MODULE(interpreter) {
@@ -1020,8 +1020,8 @@ BOOST_PYTHON_MODULE(interpreter) {
 	.add_property("tool_change_quill_up", &get_tool_change_quill_up, &set_tool_change_quill_up)
 	.add_property("tool_change_with_spindle_on", &get_tool_change_with_spindle_on,
              &set_tool_change_with_spindle_on)
-	.add_property("parameter_g73_peck_clearence", &get_parameter_g73_peck_clearence, &set_parameter_g73_peck_clearence)
-    .add_property("parameter_g83_peck_clearence", &get_parameter_g83_peck_clearence, &set_parameter_g83_peck_clearence)
+	.add_property("parameter_g73_peck_clearance", &get_parameter_g73_peck_clearance, &set_parameter_g73_peck_clearance)
+    .add_property("parameter_g83_peck_clearance", &get_parameter_g83_peck_clearance, &set_parameter_g83_peck_clearance)
 
 	.add_property( "params",
 		       bp::make_function( &param_wrapper,

src/emc/rs274ngc/rs274ngc_pre.cc

@@ -841,11 +841,11 @@ int Interp::init()
   _setup.tool_change_quill_up = 0;
   _setup.tool_change_with_spindle_on = 0;
   if (_setup.length_units == CANON_UNITS_INCHES) {
-      _setup.parameter_g73_peck_clearence = .050;
-      _setup.parameter_g83_peck_clearence = .050;
+      _setup.parameter_g73_peck_clearance = .050;
+      _setup.parameter_g83_peck_clearance = .050;
    } else{
-      _setup.parameter_g73_peck_clearence = 1;
-      _setup.parameter_g83_peck_clearence = 1;
+      _setup.parameter_g73_peck_clearance = 1;
+      _setup.parameter_g83_peck_clearance = 1;
     }
   _setup.a_axis_wrapped = 0;
   _setup.b_axis_wrapped = 0;
@@ -915,8 +915,8 @@ int Interp::init()
               _setup.c_indexer_jnum = atol(inistring);
           }
           inifile.Find(&_setup.orient_offset, "ORIENT_OFFSET", "RS274NGC");
-          inifile.Find(&_setup.parameter_g73_peck_clearence, "PARAMETER_G73_PECK_CLEARENCE", "RS274NGC");
-          inifile.Find(&_setup.parameter_g83_peck_clearence, "PARAMETER_G83_PECK_CLEARENCE", "RS274NGC");
+          inifile.Find(&_setup.parameter_g73_peck_clearance, "PARAMETER_G73_PECK_CLEARANCE", "RS274NGC");
+          inifile.Find(&_setup.parameter_g83_peck_clearance, "PARAMETER_G83_PECK_CLEARANCE", "RS274NGC");
 
           inifile.Find(&_setup.debugmask, "DEBUG", "EMC");