Merge pull request #1099 from ApolloAutomation/dev

Sync dev to main: external link fixes

Author: bharvey88

docs/homey/products/general/calibrating-and-updating/co2-calibration.md

@@ -8,7 +8,7 @@
 
 !!! tip "Calibrate manually every 1 to 2 years when auto calibration is off"
 
-    The <a href="https://sensirion.com/products/catalog/SCD40" title="Documentation on SCD40 CO<sub>2</sub> Sensor!" target="_blank" rel="noreferrer nofollow noopener">SCD40 CO<sub>2</sub> sensor</a> has a long lifetime (<a href="https://sensirion.com/media/documents/48C4B7FB/66E05452/CD_DS_SCD4x_Datasheet_D1.pdf" title="scd10 datasheet showing lifetime over 10 years" target="_blank" rel="noreferrer nofollow noopener">over 10 years</a>), but with automatic self-calibration turned off it needs re-calibration back to the 420 ppm baseline every 1 to 2 years.
+    The <a href="https://sensirion.com/products/catalog/SCD40" title="Documentation on SCD40 CO<sub>2</sub> Sensor!" target="_blank" rel="noreferrer nofollow noopener">SCD40 CO<sub>2</sub> sensor</a> has a long lifetime (<a href="https://sensirion.com/media/documents/48C4B7FB/67FE0194/CD_DS_SCD4x_Datasheet_D1.pdf" title="scd10 datasheet showing lifetime over 10 years" target="_blank" rel="noreferrer nofollow noopener">over 10 years</a>), but with automatic self-calibration turned off it needs re-calibration back to the 420 ppm baseline every 1 to 2 years.
 
 ![AIR-1 Shown Outdoors for CO2 Calibration Portrait Image](/assets/air-1-co2-calibration-portrait-image-1.jpg "AIR-1 Shown Outdoors for CO2 Calibration")
 

docs/homey/products/msr2/calibrating-co2.md

@@ -10,7 +10,7 @@ description: Step by step guide for re-calibrating your SCD40 CO2 sensor
 
 !!! tip "Calibrate manually every 1 to 2 years when auto calibration is off"
 
-    The <a href="https://sensirion.com/products/catalog/SCD40" title="Documentation on SCD40 CO<sub>2</sub> Sensor!" target="_blank" rel="noreferrer nofollow noopener">SCD40 CO<sub>2</sub> sensor</a> has a long lifetime (<a href="https://sensirion.com/media/documents/48C4B7FB/66E05452/CD_DS_SCD4x_Datasheet_D1.pdf" title="scd10 datasheet showing lifetime over 10 years" target="_blank" rel="noreferrer nofollow noopener">over 10 years</a>), but with automatic self-calibration turned off it needs re-calibration back to the 420 ppm baseline every 1 to 2 years.
+    The <a href="https://sensirion.com/products/catalog/SCD40" title="Documentation on SCD40 CO<sub>2</sub> Sensor!" target="_blank" rel="noreferrer nofollow noopener">SCD40 CO<sub>2</sub> sensor</a> has a long lifetime (<a href="https://sensirion.com/media/documents/48C4B7FB/67FE0194/CD_DS_SCD4x_Datasheet_D1.pdf" title="scd10 datasheet showing lifetime over 10 years" target="_blank" rel="noreferrer nofollow noopener">over 10 years</a>), but with automatic self-calibration turned off it needs re-calibration back to the 420 ppm baseline every 1 to 2 years.
 
 This article will guide you through a simple calibration of your CO<sub>2</sub> sensor for any Apollo Automation device!
 

docs/homey/products/msr2/examples/msr2-alarmo.md

@@ -2,7 +2,7 @@
 
 My grandmother wanted a security system that would alert her when there was movement in her home after she had gone to bed. So, I set up three of our Apollo Automation mmWave sensors. These devices, plus the Alarmo add-on, quickly and easily allowed me to install a fully local, private, cloud-free, and no monthly subscription security system. She can arm/disarm it with one button on her Home Assistant dashboard, and it makes her feel much safer. This guide assumes you already have a motion/presence sensor installed on HA.
 
-1\. Install [HACS](https://hacs.xyz/docs/setup/download/)  
+1\. Install [HACS](https://hacs.xyz/docs/use/download/download/)  
 2\. Install [Alarmo](https://github.com/nielsfaber/alarmo?tab=readme-ov-file#installation) and the [Alarmo Card](https://github.com/nielsfaber/alarmo-card) (Pretty Arm and Disarm card for your HA dashboard)  
 
 ![Alarmo 7.png](/assets/alarmo-7.png)  

docs/homey/products/mtr1/examples/mtr1-alarmo.md

@@ -2,7 +2,7 @@
 
 My grandmother wanted a security system that would alert her when there was movement in her home after she had gone to bed. So, I set up three of our Apollo Automation mmWave sensors. These devices, plus the Alarmo add-on, quickly and easily allowed me to install a fully local, private, cloud-free, and no monthly subscription security system. She can arm/disarm it with one button on her Home Assistant dashboard, and it makes her feel much safer. This guide assumes you already have a motion/presence sensor installed on HA.
 
-1\. Install [HACS](https://hacs.xyz/docs/setup/download/)  
+1\. Install [HACS](https://hacs.xyz/docs/use/download/download/)  
 2\. Install [Alarmo](https://github.com/nielsfaber/alarmo?tab=readme-ov-file#installation) and the [Alarmo Card](https://github.com/nielsfaber/alarmo-card) (Pretty Arm and Disarm card for your HA dashboard)  
 
 ![Alarmo 7.png](/assets/alarmo-7.png)  

docs/homey/products/temp1/examples/temp1-alert-example.md

@@ -6,7 +6,7 @@ This will guide you through how to setup the built in alarm using the temperatur
 
 1\. Place the temperature probe into your freezer (not the entire TEMP-1, just the probe!) and then wait for it to normalize around 0 degrees F aka -18C.
 
-2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30F so I would want to go slightly above that range. However, <a href="https://www.energy.gov/energysaver/refrigerator-freezer-use-and-temperature-tips" target="_blank" rel="noreferrer nofollow noopener">in most freezers they should NOT reach above 0F</a> so you will likely need to input a lower value than me. my minimums are around -20F.
+2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30F so I would want to go slightly above that range. However, <a href="https://www.fda.gov/food/buy-store-serve-safe-food/refrigerator-thermometers-cold-facts-about-food-safety" target="_blank" rel="noreferrer nofollow noopener">in most freezers they should NOT reach above 0F</a> so you will likely need to input a lower value than me. my minimums are around -20F.
 
 ![](/assets/temp-1-temp-probe-ex-automation-pic-1.png)
 

docs/homey/products/temp1/examples/temp1-automation-examples.md

@@ -6,7 +6,7 @@ This will guide you through how to setup an automation in Home Assistant using t
 
 1\. Place the temperature probe into your freezer and then wait for it to normalize around 0°F (-18°C). Make sure your TEMP-1 is in a cool dry place - only the temp probe and wire can withstand the temperatures in the fridge, freezer, etc.
 
-2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30°F so I would want to go slightly above that range. However, <a href="https://www.energy.gov/energysaver/refrigerator-freezer-use-and-temperature-tips" target="_blank" rel="noreferrer nofollow noopener">in most freezers, they should NOT reach above 0</a>°<a href="https://www.energy.gov/energysaver/refrigerator-freezer-use-and-temperature-tips" target="_blank" rel="noreferrer nofollow noopener">F</a> so you will likely need to input a lower value than me. my minimums are around -20°F.
+2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30°F so I would want to go slightly above that range. However, <a href="https://www.fda.gov/food/buy-store-serve-safe-food/refrigerator-thermometers-cold-facts-about-food-safety" target="_blank" rel="noreferrer nofollow noopener">in most freezers, they should NOT reach above 0</a>°<a href="https://www.fda.gov/food/buy-store-serve-safe-food/refrigerator-thermometers-cold-facts-about-food-safety" target="_blank" rel="noreferrer nofollow noopener">F</a> so you will likely need to input a lower value than me. my minimums are around -20°F.
 
 ![](/assets/temp-1-temp-probe-ex-automation-pic-1.png)
 

docs/homey/products/temp1b/examples/temp1b-alert-example.md

@@ -6,7 +6,7 @@ This will guide you through how to setup the built in alarm using the temperatur
 
 1\. Place the temperature probe into your freezer (not the entire TEMP-1B, just the probe!) and then wait for it to normalize around 0 degrees F aka -18C.
 
-2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30F so I would want to go slightly above that range. However, <a href="https://www.energy.gov/energysaver/refrigerator-freezer-use-and-temperature-tips" target="_blank" rel="noreferrer nofollow noopener">in most freezers they should NOT reach above 0F</a> so you will likely need to input a lower value than me. my minimums are around -20F.
+2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30F so I would want to go slightly above that range. However, <a href="https://www.fda.gov/food/buy-store-serve-safe-food/refrigerator-thermometers-cold-facts-about-food-safety" target="_blank" rel="noreferrer nofollow noopener">in most freezers they should NOT reach above 0F</a> so you will likely need to input a lower value than me. my minimums are around -20F.
 
 ![](/assets/temp-1-temp-probe-ex-automation-pic-1.png)
 

docs/homey/products/temp1b/examples/temp1b-automation-examples.md

@@ -6,7 +6,7 @@ This will guide you through how to setup an automation in Home Assistant using t
 
 1\. Place the temperature probe into your freezer and then wait for it to normalize around 0°F (-18°C). Make sure your TEMP-1B is in a cool dry place - only the temp probe and wire can withstand the temperatures in the fridge, freezer, etc.
 
-2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30°F so I would want to go slightly above that range. However, <a href="https://www.energy.gov/energysaver/refrigerator-freezer-use-and-temperature-tips" target="_blank" rel="noreferrer nofollow noopener">in most freezers, they should NOT reach above 0</a>°<a href="https://www.energy.gov/energysaver/refrigerator-freezer-use-and-temperature-tips" target="_blank" rel="noreferrer nofollow noopener">F</a> so you will likely need to input a lower value than me. my minimums are around -20°F.
+2\. Once normalized, look at the graph and determine a good value to set for both the maximum and minimum temperatures. My mini freezer seems to max out at 30°F so I would want to go slightly above that range. However, <a href="https://www.fda.gov/food/buy-store-serve-safe-food/refrigerator-thermometers-cold-facts-about-food-safety" target="_blank" rel="noreferrer nofollow noopener">in most freezers, they should NOT reach above 0</a>°<a href="https://www.fda.gov/food/buy-store-serve-safe-food/refrigerator-thermometers-cold-facts-about-food-safety" target="_blank" rel="noreferrer nofollow noopener">F</a> so you will likely need to input a lower value than me. my minimums are around -20°F.
 
 ![](/assets/temp-1-temp-probe-ex-automation-pic-1.png)
 

docs/homey/products/temp1b/faq.md

@@ -2,7 +2,7 @@
 
 1\.**How is the TEMP-1B powered?**
 
-* The TEMP-1B operates with a **rechargeable** <a href="https://www.amazon.com/Rechargeable-Capacity-Batteries-Headlamp-Flashlight/dp/B0CZLGH9FW" target="_blank" rel="noreferrer nofollow noopener">16340 Flat Top battery</a> (not included), giving it portability for temp monitoring without being tied to an outlet.
+* The TEMP-1B operates with a **rechargeable** <a href="https://apolloautomation.com/products/16340-rechargeable-battery" target="_blank" rel="noreferrer nofollow noopener">16340 Flat Top battery</a> (not included), giving it portability for temp monitoring without being tied to an outlet.
 
 2\. **How long does the battery last in the TEMP-1B?**
 

docs/products/air1/examples/firstof9's-apex-charts.md

@@ -12,7 +12,7 @@ The colors will change as severity levels change for each of the sensors below.
 
 ![firstof9-dash-image-full.png](/assets/firstof9-dash-image-full.png)
 
-This guide assumes you already have HACS installed. If you do not, please first [install HACS](https://hacs.xyz/docs/setup/prerequisites "Install HACS").
+This guide assumes you already have HACS installed. If you do not, please first [install HACS](https://hacs.xyz/docs/use/download/prerequisites/ "Install HACS").
 
 First, you need to install apexcharts-card by going to the HACS tab and searching "apexcharts-card".